Uniden BC250D manual Changing the Priority Channel, Priority Channel Plus Scan

Changing the Priority Channel

You cannot eliminate the Priority Channel, but you can change it to any one of the 100 available channels in each bank.

1.Press HOLD/MAN.

2.Select a new Priority Channel:

a.Enter the channel number using the keypad.

b.Then press HOLD/MAN again.

CH/
FRQ
HOLD/		RSM
MAN
SCAN	SERVICE	SEARCH
MENU/BACK		TRUNK

L/O

REVERSESELECT

.E

3.Press and hold PRI for 2 seconds to designate this channel as your new Priority Channel.

Two beeps indicates that the Priority Channel has been changed. The P icon appears on the display.

C 001

512.0000 NFM

UHF TV 1 UNIDEN Group A

Note: • Priority in Trunking mode works just the same, except you set them for talkgroup IDs, instead of setting priorities for channels. The scanner only checks priority talkgroups between transmission, in 4 second intervals.

•Priority Scan is disabled while M, E or L (Trunking type) icons are illuminated (a beep will sound if you try to scan). To make it possible, turn OFF each function then press PRI to select PRIORITY ON.

Priority Channel Plus Scan

You can scan only the Priority Channels (except for the lock out channels) in the banks you selected. To activate Priority Channel Plus

(Only in Scan mode):

1.Press PRI to select PRIORITY PLUS.

2.Press PRI to select PRIORITY ON or PRIORITY OFF on the display to deactivate Priority Channel Plus Scan.

Note: Priority or Priorty Plus Scan are disabled while Search mode is selected.

35