Uniden BC250D manual Service Search Skip, NWR-SAME Alert

Page 48

commonly used at special events and other locations and may or may not be licensed.

•When you rotate the VFO while the Service Search is active, you can change the search direction to up or down.

During the search of one of the preprogrammed services, the lowest display line will indicate the service that you are searching. To stop the search, press HOLD/MAN. Rotate the VFO to move up or down one programmed frequency or press RSM to resume searching.

Service Search Skip

You can set the scanner to skip the unwanted frequencies during Service Search. 100 skipped frequencies are programmable.

1.To skip over a frequency, press L/O when stopping at the frequency you want to skip.

2.To cancel a skip during search, press HOLD/MAN, select the desired frequency by rotating the VFO, then press L/O.

To restore all skipped frequencies, press and hold L/O for 2 seconds.

Note: • You can not skip a set frequency in WEATHER service mode.

SRVC --CH 453.6000 NFM

SERVICE SEARCH PUBLIC SAFETY

•If you start the service seaching while all frequencies in service search menu are set to skipped the frequencies, you hear a beep and the scanner moves to the Hold mode.

NWR-SAME Alert

In addition to the conventional weather broadcasts, your BC250D is compatible with NWR-SAME weather alert. When the scanner receives NOAA’s Specific Area Message Encoding (SAME) coded weather emergency signal, it sounds the alert siren with a specified message. You must program your FIPS code to identify the specific area where you are located.

1.Press MENU/BACK.

2.Select 1:SERVICE OPTION / 1:WEATHER /

2:ALERT by rotating the VFO and

 

 

SRVC

2CH

pressing E.

162.6000

FM

 

3. Select 1:ON by rotating the VFO and

SERVICE SEARCH

pressing E.

WX ALERT ON

 

44

Page 47 Page 49
Image 48
Page 47 Page 49
Contents Page Page Contents Edacs Scat Introduction LTRFront View Icon Display Icon DescriptionBC250D Shortcuts Press Important Notice What is Scanning? What is Searching?What is Trunk Tracking? TerminologyWhat is Apco Project 25 Digital Communications? Feature Highlights Page Where to Obtain More Information Information on the InternetScanner.uniden.com Included with Your Scanner Package Setup Installing the Battery PackCharging the Battery Pack Low Battery IndicatorConnecting the Remote Cable Flexible AntennaBeltclip Listening SafelySetting the Squelch Basic OperationTurn the Scanner On Understanding the Menu System Menu Description and Numeric Keypad Equivalents You can assign a variety of step sizes to the search range 5TONE Data 4BEEP Alert You can assign a variety of step sizes to the channel 8I-CALLMOTOROLA/EDACS 8ID Scan List LTR Cntrl CH only 9BANK TAG Storing Frequencies into Channels in Menu Mode UsingProgramming Press MENU/BACKDeleting a Stored Frequency Editing a Stored FrequencyDuplicate Frequency Alert PressTransfer Frequencies Storing Text TagsPress HOLD/MAN Assigning a Bank Tag to a Bank Press MENU/BACKBeep Alert Programming TipsAssigning the Beep Alert to a Channel Page Scanning Storing Frequencies During ScanningDuring Scanning Press HOLD/MAN RF Attenuation Feature Setting the Delay Mode for FrequencyLockout in Hold Mode Press HOLD/MAN Lockout in Scanning ModeChannel Lockout Restoring a Locked-out Channel Restoring All Locked-out ChannelsPriority Scan Changing the Priority Channel Priority Channel Plus ScanSetting a Search Range SearchingSearch Hold Feature Starting Chain SearchData Skip Frequency Skip Storing Search FrequenciesAuto Storing C004 0000.0000Squelch SQ Mode Tone Search mode001 512.0000 NFM Ctcss 250.3 Bank Additional Menu Options for Searching Service Search Service OptionService Search Skip NWR-SAME AlertTesting the Alert Siren Programming Fips CodeTo clear a stored Fips code, press 0 and E successively Digital and Trunked Systems Page Programming Receiving Digital and Trunked Systems Selecting or Changing Trunking System TypeProgramming Trunking Frequencies For instructions. is completeProgramming ID Scan Lists Manually To enter a Type 2 Talk Group ID To enter a Type 1 IDTo enter an Edacs ID To enter a LTR ID Assigning a Text Tag to a Talk Group ID Press MENU/BACKReceiving Trunked Systems ID Scan Mode ID Scan 867.9875 NFM ListID Scan Hold Feature ID Monitor ModeTo directly access a specific channel Trunked SearchID Search Hold and Direct Entry ID Hold Mode ID LockoutSCAN, RSM or Search Review ID Lockout Restoring Locked-out IDsTo unlock a single ID, follow these steps Press MENU/BACK To unlock all locked out IDs in a bank onceSetting the Delay Mode for Trunking Mode Reverse KeySetting Priority in Trunking Mode Programming Scan Lists During SearchDeleting a Stored ID Moving between Scan List Memories Call Motorola/EDACSMulti-Track You can enter the instant shortcutMulti-Track Operational Details Edacs Reception Edacs TrackingAn Edacs Trunked system SearchSpecial Edacs Features AFS Partial Entry FeaturePatch Tracking LTR Reception LTR TrackingMotorola Reception Motorola TrackingSelecting Preset Fleet Map Fleet Map ProgrammingProgramming a Fleet Map Programming a Hybrid System50.0 Control Channel Only Mode Toggling the Status BitPage Disconnect Tone Detect Option End Code Installing the Apco P-25 Card Apco Project ReceptionPrecautions for Installing the BCi25D Card Turning ON/OFF the Apco P-25 CardApco P-25 Sound Quality Fine Tuning Threshold Adjustment RangePage PC Control Mode Remote InterfaceTo connect Scanner to PC To program your scannerClone Mode Start Remote Mode and Change Transfer SpeedScanner.uniden.com PC Control Parameter Master To connect the Scanner to ScannerClone Additional Features DimmerEnter Lock Key LockReverse Mode Key Beep OptionScreen Mask Channel Step SelectionReceiving Mode Selection Frequency and Channel Tuning with the VFO ControlCare and Maintenance Troubleshooting Problem Suggestion Specifications Glossary of Terms Page Page Page Preset Fleet Maps AppendixPreset Map Block User Defined Fleet Maps Type I Programming InformationFleet Map Size Codes Size Code RestrictionsNWR-SAME Event Code 100 101 BC250D Flow Charts 102103 104 One Year Limited Warranty Uniden America Corporation

BC250D specifications

The Uniden BC250D is a versatile and powerful handheld scanner that caters enthusiastically to the needs of both amateur radio enthusiasts and professionals alike. With its compact design and extensive feature set, the BC250D stands out in the crowded field of communication devices.

One of its significant features is the 200 channels it can store, making it suitable for various scanning tasks. Users can easily program frequencies across public service and amateur bands, including police, fire, and emergency medical services. The BC250D also supports a full range of frequencies from 24 MHz to 1300 MHz, accommodating diverse communication needs.

The scanner’s advanced trunking capabilities allow users to access trunked radio systems, which are frequently used by public safety agencies and commercial entities. It supports both Motorola and EDACS trunking protocols, making it adaptable to numerous scanning scenarios.

Another key characteristic of the BC250D is its customizable scanning options. Users can set priorities for specific channels, enabling them to focus on the most relevant communications. The scanner also features a "Close Call" technology that detects nearby signals automatically, providing real-time monitoring without pre-programmed frequency setups. This feature is particularly beneficial for catching local transmissions that might not be otherwise listed.

The interface of the BC250D is user-friendly, designed to allow easier navigation through its extensive features. The display is crisp and vibrant, presenting information clearly even in low-light conditions. Additionally, the scanner supports alpha tagging, allowing users to assign names to channels for easier identification.

Powering the Uniden BC250D is an internal rechargeable lithium-ion battery, which ensures longer use without the need for frequent battery changes. Plus, with an included belt clip, it’s easy to carry around, making it perfect for users who are always on the go.

In terms of connectivity, the BC250D's built-in computer interface allows for firmware updates and programming through a PC, enhancing its functionality over time.

Overall, the Uniden BC250D combines advanced scanning technology with user-friendly features, solidifying its position as a reliable scanner for a wide range of applications. Whether for hobbyists or professional users, this scanner delivers performance, flexibility, and ease of use.
Top Page Image Contents