Viking PSFEM1xxxGQxxx manual Electrical Characteristics, Standby Immediate Command, Supply Voltage

2.2.1 STANDBY IMMEDIATE Command

The Power-On-to-Ready time assumes a proper shutdown (power removal preceded by STANDBY IMMEDIATE command. A STANDBY IMMEDIATE before power down always performs a graceful shutdown and does not require the use of the hold-up circuit. Note that SMART attribute 174 "Unexpected Power Loss" records the number of non-graceful power cycle events.

Table 2-4: STANDBY IMMEDIATE Timing

Power Cycle Endurance	Min	Max	Unit
STANDBY IMMEDIATE to WE completed	-	72.9	ms

Notes:

1.From Standby Immediate command to NAND Write Protect enable.

2.3Electrical Characteristics

2.3.1 Absolute Maximum Ratings

Values shown are stress ratings only. Functional operation outside normal operating values is not implied. Extended exposure to absolute maximum ratings may affect reliability.

Table 2-5: Absolute Maximum Ratings

Description	Min	Max	Unit
Maximum Voltage Range for Vin	-0.2	6	V
Maximum Temperature Range	-40	85	c

2.3.2 Supply Voltage
The operating voltage is 5V.
Table 2-6: Operating Voltage
Description		Min	Max	Unit
Operating Voltage for 5.0 V (+/- 5%)		4.75	5.25	V
Table 2-8: Current Draw – SATA
Mode	Typical1		Unit
Read/Writes (Average RMS)	215 / 310		mA
Idle	25		mA
Slumber	10		mA
Notes:

1. Measured using 16GB SLC, VRFEM1016GQCQS

Manual

PSFEM1xxxGQxxx

Revision B www.vikingtechnology.com

9/11/2014

Viking Technology

Page 14 of 33