7 Glossary
This document incorporates many industry and device specific words. The following list defines a variety of these terms and acronyms.
Term
Definition
ATA | Advanced Technology Attachment |
ATAPI | Advanced Technology Attachment Packet Interface |
| Bit error rate, or percentage of bits that have errors relative to the total number of bits |
BER | received |
| Device Initiated Link Power Management. The ability of the device to request SATA link |
DIPM | power state changes. |
DMA | Direct Memory Access |
eMLC | Enterprise |
EXT | Extended |
FP | First Party |
GB | |
HDD | Hard Disk Drive |
| A term used to describe the removal or insertion of a SATA storage drive when the |
Hot Plug | system is powered on. |
IOPS | Input output operations per second |
LBA | Logical Block Address |
MB | |
MLC | |
MTBF | Mean Time Between Failures |
| Native Command Queuing. The ability of the SATA hard drive to queue and |
NCQ | commands to maximize execution efficiency. |
NOP | No Operation |
OS | Operating System |
Port | The point at which a SATA drive physically connects to the SATA controller. |
RMS | Root Mean Squared |
RPM | Revolutions Per Minute |
SAS | Serial Attached SCSI |
SATA | Serial ATA |
SFF | Small Form Factor |
SLC | Single Level Cell |
| |
| hard drives and software systems that automatically monitors a hard drive’s health and |
S.M.A.R.T. | reports potential problems. |
SSD |
Manual
PSFEM1xxxGQxxx
Revision B www.vikingtechnology.com
9/11/2014
Viking Technology
Page 33 of 33