Viking PSFEM1xxxGQxxx manual Environmental Conditions, Power Consumption, Temperature and Altitude

Page 15

2.3.3 Power Consumption

All onboard power requirements of the SSD are derived from the SATA 5.0V input rail.

Table 2-7: Typical Power Consumption

Mode	Typical	Unit
Active	tbd	W
Idle	tbd	W

2.4Environmental Conditions

2.4.1Temperature and Altitude

Table 2-8: Temperature and Altitude Related Specifications

Conditions	Operating	Shipping	Storage
Commercial	0 to 70°C	-40 to 85°C	-40 to 85°C
Temperature	(32 to 158° F)	(-40 to 185° F)	(-40 to 185° F)
- Ambient
Industrial	-40 to 85°C	-40 to 85°C	-40 to 85°C
Temperature	(-40 to 185° F)	(-40 to 185° F)	(-40 to 185° F)
- Ambient
Humidity (non-	95% under 55C	95% under 55C	95% under 55C
condensing)

Notes:

1.SLC flash based products may be available in the following temperature ranges:

a)Commercial temperature range of 0 to 70°C (32 to 158° F)

b)Industrial temperature range -40 to 85°C (-40 to 185° F)

2.4.2 Shock and Vibration

SSD products are tested in accordance with environmental specification for shock and vibration

Table 2-9: Shock and Vibration Specifications

		Description
	Shock	50g, 11ms, 3 shocks applied in each direction on 3 mutually perpendicular
	Shock	axes X, Y, Z
		axes X, Y, Z
	Vibration	16.4g rms 10-2,000 Hz, 3 axes

2.4.3 Electromagnetic Immunity

SSD is an embedded product for host systems and is designed not to impair with system functionality or hinder system EMI/FCC compliance.

Manual

PSFEM1xxxGQxxx

Revision B www.vikingtechnology.com

9/11/2014

Viking Technology

Page 15 of 33

Image 15

Contents Sata 3Gb/s Industrial Slim Sata Manual Date Revision Description Checked by Revision HistoryLegal Information Technology GB1 LBA Mode RangeUseable Addressable Part Numbers Application Capacity SectorsSlim Sata Top View Product PicturesManual PSFEM1xxxGQxxx 11/2014 Viking Technology Table of Contents Sata Commands Native Command Queuing NCQ ATA CommandsTable of Figures Table of TablesIntroduction FeaturesHigh-Level Block Diagram for VRFEM1xxxGQxxx Block DiagramSata Interface Timing Product SpecificationsTiming Specifications PerformanceSupply Voltage Electrical CharacteristicsStandby Immediate Command Absolute Maximum RatingsShock and Vibration Power ConsumptionTemperature and Altitude Environmental ConditionsParameter VRFEM1xxxGQxxx 10 Reliability SpecificationsReliability Data SecurityMechanical Information DimensionsSerial ATA Connector Pin Signal Definitions Pin and Signal DescriptionsSlim Sata SSD Weight Signal and Power Description TablesSupported ATA Commands Command SetsATA Commands Serial ATA Power Pin Definitions1 48-Bit Address Command Set Host Protected Area Command Set ATA General Feature Command SetDevice Configuration Overlay Command Set General Purpose Log Command SetSecurity Mode Feature Set Power Management Command SetWord Variable Default Value Description Both Identify Device DataList of Device Identification Word Variable Default Value Description Both Word Variable Default Value Description Both 1 S.M.A.R.T. Support Capacity specific Device IdentificationCapacity Word 1/Word 2 S.M.A.R.T. Command Set Extended Smart Attribute Table S.M.A.R.T. Command SetValue hex Command Extended Smart AttributesData Extended Smart Attribute Actual DataManual PSFEM1xxxGQxxx 11/2014 Viking Technology Supported S.M.A.R.T. Execute OFF-LINE Immediate Subcommands Off-line ModeSata Commands Native Command Queuing NCQReferences Term Definition Glossary