Power Supply hanger brackets
The Coloram II Power Supplies are shipped with hanger brackets to allow pipe or truss mounting.
Follow these steps to install the hanger bracket.
1.Disconnect AC power from the Power Supply.
2.Place the Power Supply on it’s side on a flat surface.
3.Position the brackets as shown below.
4.Attach the bracket using a 3/16" Allen wrench and the supplied screws.
Note: Use the supplied thumb screws to clamp the hanger brackets to the desired pipe or truss.
Figure 6
SUPPLY | POWER |
|
|
| WAY 12 |
| |
|
| 19012 | |
|
|
|
Figure 10
19