DMX512 control cable
The DMX control cable from the lighting board to the Power Supply is a five conductor cable with
XLR Pin # | Function |
1 | Common |
2 | Data - |
3 | Data + |
4 | Talkback - |
5 | Talkback + |
Specifications
The Coloram II Power Supply
Connectors:
DMX in: Male
DMX out: Female
Coloram output: Female
DMX512 termination: Terminated and regenerated
Fuse:
24 Way Power Supply - model 19000):
7 amp slow blow at 115 VAC
4 amp slow blow at 230 VAC
12 Way Power Supply (model 19012):
4 amp slow blow at 115 VAC
2 amp slow blow at 230 VAC
6 Way Power Supply (model 19060):
2 amp slow blow at 115 VAC
1 amp slow blow at 230 VAC
Input Power: Automatically accepts 100 - 132 VAC 50/60 Hz and 170 - 240 VAC 50/60Hz
Input Signal: 1990 USITT standard DMX512
LED display: Indicates power, signal, system status, and is used to configure the system
Power loss DMX bypass relay: Yes Size:
24 Way Power Supply:
14.66"/372.5mm L x 8.16"/207.4mm W x 5.34"/135.6mm H
12 Way Power Supply:
13.75"/349.2mm L x 7.85"/199.4mm W x 4.05"/102.9mm H
6 Way Power Supply:
12.45"/316.2mm L x 7.60"/193.1mm W x 3.65"/92.7mm H
22