XiNCOM XC-DPG602 NS Record Primary/Secondary Name Server, Public WAN 1 & 2 IP Address, Location

Page 37

Domain Name Configuration

NS Record

Primary/Secondary Name Server

This holds the settings for the domain. This setting is usually obtained locally rather than a remote source.

Public WAN (1 & 2) IP Address

This sets the public IP address for the domain name on the specified WAN Port.

MX Record

Mail Exchange

This sets the mail route for the domain name.

Preference (1 & 2)

This sets the route preference. The lower number will have the higher priority.

Location

This sets the location for either the public or private IP.

IP Address

The user can set the IP address of the public or private mail server.

37

Image 37
Contents Twin WAN DNS IP Gateway Table of Contents QoS Configuration DNS Configuration Use TWO ISPs for expanded bandwidth and redundancy IntroductionFeatures Password Protected Configuration Easy SetupHttp Firmware Upgrade and backup Dhcp Server SupportSystem Physical DetailsLED Action Condition Default SettingsOverview Basic SetupProcedure Configuring the XC-DPG602 for your LANNo Response? Configuring the XC-DPG602 for your LAN Installation Diagram for XC-DPG602 Connecting two broadband modemsSettings Primary Setup Connection Mode Configuring for Internet AccessConnection Type Address InfoTCP/IP Settings Configure PCs on your LANInternet Access OverviewFor Linux Clients For Apple ClientsFixed IP Address To act as a Dhcp Client recommendedAdvanced Port Port Options Health Check Auto Dialup Bridge ModeLoad Balance Settings Load BalanceAdvanced PPPoE Settings Advanced PPPoEAdvanced Pptp Settings Advanced PptpAdvanced Setup Host IP Host IPVirtual Servers Virtual ServersCustom Virtual Servers Settings Custom Virtual ServersCustom Virtual Servers Server ListSpecial Applications Settings Special ApplicationsSpecial Application Settings Dynamic DNS To use the Dynamic DNS FeatureDynamic DNS Dynamic DNSFor Dynamic IP Multi DMZ & UPnPSelect the desired WAN port Private IP AddressAdvanced Features Advanced FeaturesSettings Advanced Features HTTP// Internet IP Address of the XC-DPG602 Using Remote Web-based SetupFirewall Exception Security ManagementBlock URL Access FilterBlock URL Session Limit Session Limit & Firewall ExceptionQoS Configuration Configure DNS DNS ConfigurationXC-DPG602 & 603 Gateways How it worksDomain Name Configuration Public WAN 1 & 2 IP Address NS Record Primary/Secondary Name ServerMX Record Mail Exchange Preference 1Record Map Host URLCname Record Host URL ListSnmp Simple Network Management Protocol Management AssistantEmail Alert System InformationSyslog Management AssistantSyslog Configuration Message StatusUpgrade Firmware Admin Password ScreenUsing the Tftp Utility Recommended Updating the Firmware Backup your configurationUploading the Firmware Http Upgrade FirmwareTo upload the firmware to the router Restoring Saved ConfigurationOperation & Status Overview Operation & StatusSystem Status Operation & Status Restore Factory DefaultsWAN Status NAT StatusExisting Dhcp Server Advanced LAN ConfigurationStatic Routing Advanced LAN Configuration192.168.2.0 Configuring other Routers on you LAN255.255.255.0 192.168.1.100Operating Temperature DimensionsStorage Temperature External Power AdapterChecking TCP/IP Settings Windows 9x/ME TCP/IP SettingsUsing Dhcp Using Specify an IP AddressUsing a fixed IP Address Use the following IP Address Checking TCP/IP Settings WindowsFigure G. Network Configuration Windows XP Checking TCP/IP Settings Windows XPOverview Troubleshooting
Related manuals
Manual 52 pages 60.23 Kb