Worth Data 5202D owner manual Code Identification / Length Settings

Prefix / Suffix ASCII Value Table Continued:
ASCII	Command	ASCII	Command	ASCII	Command	ASCII	Command
^	8E	0	R1			(SUB)	2[
_	8F	1	R2			(ESC)	:B
`	8G	2	R3			(FS)	:C
{	:U	3	R!			(GS)	:D
	:V	4	R5			(RS)	:E
}	:W	5	R6			(US)	:F
~	:X	6	R7			DEL	:G
		7	R8
		8	R9
		9	R:
Code Identification / Length Settings:
Code Identification		code identification using Worth Data Code ID					%3
		code identification using AIM/ISO/IEC 15424 ID					%2
Code Length		code length (1D/2D : 2/6 digit)					%!
		code length (1D/2D : 6/6 digit)					%7

Code Identification and Code Length can be included in a prefix and/or suffix. The code length will be the number of characters that is configured above. The code identification and code length can be put at any position in the prefix/suffix string. These direct input characters count as 1 entry of the 4 permissible entries for a prefix and suffix.

The code length is transmitted as 2 digits, excluding prefix and suffix characters. For 2D codes the code length is transmitted as 6 digits. It is also possible to send the length as 6 digits for both 1D and 2D codes.

A-41