Worth Data 5202D owner manual Ytd, Yti, FC1, FC2, FC3, Yte, Ytf, Ytg, Yth

Read Mode Settings Continued:

Add-on Delay Timer

disable add-on wait more	default	YB
add-on wait mode = 0.25 seconds		YC
add-on wait mode = 0.50 seconds		YD
add-on wait mode = 0.75 seconds		YE

Since WPC-type codes (UPC, EAN) with add-on (supplements) have a high probability of unsuccessful decoding, the scanner repeats decoding the add-on code during the specified period of time. It is effective to read the add-on parts, but it will also cause a reduced response when a code without an add-on is read.

	no margin check		/ZO
	margin check 1/7 normal		ZP
	margin check 2/7 normal		ZQ
Margin Check	margin check 3/7 normal		ZR
(Quiet Zone)	margin check 4/7 normal		ZS
	margin check 5/7 normal		ZT
	margin check 6/7 normal		ZU
	margin check normal	default	ZV
	disable power saving (USB I/F default)	default	YTD
	power saving after 0 seconds (RS-232 I/F default)	default	F75
	power saving after 1 second		YTI
	power saving after 2 seconds		FC1
Power Saving	power saving after 5 seconds		FC2
	power saving after 10 seconds		FC3
	power saving after 30 seconds		YTE
	power saving after 10 minutes		YTF
	power saving after 30 minutes		YTG
	power saving after 60 minutes		YTH

A-48