Worth Data 5202D owner manual Set to factory default

Set to factory default:

To set the scanner to factory defaults, scan one of the codes below.

Set USB I/F and Reset All Settings to Default

Set RS-232 I/F and Reset All Settings to Default

Note: The RS-232 I/F setting applies to the LZ520-2D when used as an external scanner attached to portable devices such as the Terminal and TriCoder.

Warning: These setup codes are for the LZ520-2D scanner on a 2D integrated Terminal or TriCoder. units.

only. Do not use these codes to setup the 2D Use the internal menu to configure those

A-3