A&D AD-4212B-101/102/201/301 Confirming the date, Set the date using the following keys

Confirming the date

6 The current date is displayed with all the digits blinking. To change the display order of year (y), month (n) and day (d), press the MODE key. The date is output in the order as specified.

When the date is correct and the operation is to be finished, press the CAL key and proceed to step 8. When the time is to be confirmed again, press the SAMPLE key and go back to step 4.

When the date is not correct and is to be changed, press the RE-ZERO key and proceed to step 7.

Note

The year is expressed using a two-digit format. For example, the year 2001 is expressed as “01”.

Setting the date (with part of the digits blinking)

7 Set the date using the following keys.

SAMPLE			key		To select the digits to change the
						value. The selected digits blink.
				key	To increase the value by one.
RE-ZERO
		key			To decrease the value by one.
MODE
		key			To store the new setting, display
PRINT
							and go to step 8.
						end
	key				To cancel the new setting and go
CAL
						to step 8.

Quitting the operation

8The balance displays the next menu of the function table. Press the CAL key to exit the clock and calendar function and return to the weighing mode.

Notes

Do not enter invalid values such as a non-existing date when setting the time and date.

When the clock backup battery has been depleted, the balance displays rtc pf . Under this condition, press any key and set the time and date. The dead battery only affects the clock and calendar function. Even so, the function works normally as long as the AC adapter is connected to the balance.

41