Panasonic KV-S6055WU, KV-S6050WU installation manual Precautions, ³Power Source

Page 11

Precautions

Operating Environment

Do not place the unit in direct sunlight or in a cold draft.

Do not operate or place the unit in a vertical position.

Do not place the unit near a heating appliance or an air conditioning vent. Do not place the unit in a room with extremely high or low humidity.

Do not place the unit near other appliances which generate large electrical noise.

Do not place the unit on a carpet. (Static electricity can cause the unit to malfunction.)

Do not drink or inhale the included roller cleaning paper fluid.

The roller cleaning paper may be harmful to sensitive skin, so please use protective gloves.

Do not use the roller cleaning paper near a heater or open flame. This may cause a fire.

³Power Source

Use a voltage level that does not vary more than ±10 % from the voltage level marked on the nameplate (located on the back side of the scanner ).

Do not use an extension cord.

This scanner should be connected to a grounded outlet.

Do not use a line conditioner, transient suppressor or surge protector.

11

Image 11
Contents Model No. KV-S6050W / KV-S6055W KV-S6050WU / KV-S6055WU Scsi board ºSystem requirementsMemory RAM Table of Contents Hinweis For United States onlyAvertissement WarnungSvenska For United Kingdom only How to replace the fuseEnglish For roller cleaning paper Advertencia Precautions ³Power Source PrecautionsPrecautions ºCD-ROM Component Identification Scanning section glass Component IdentificationCover sheet Standard mark Document glass CIS glassºDisplay panel and keys Display Panel InstructionsHome key Display Panel Instructions ºSetting the languageTurn the power on while pressing Scan menu Display Panel Instructions ºSetting the scannerContent Display Panel Instructions Imprinter menu Counter menuScsi ID Others menuDisplay Panel Instructions ´ Operation Scan setting menu by pressing the Scan key Display Panel Instructions ´ Actual settingsBack side image emphasis Front side halftoneBack side dropout color Back side brightnessDouble feed detection Scanning modeBack side halftone Noise reductionFeed speed Setting the Double Feed detector ActionSetting the Double Feed detector Sensitivity Setting the Detect SkewScanning method Save Scanning Settings Select memorySave Scanning Settings Load scanning settingCounter setting menu by pressing the Counter key Setting the imprinter position Imprinter setting menu by pressing the Imprint keyNumber, item and default display Contents Setting the imprinter dataSetting the imprinter orientation Otherssetting menu by pressing the Others key Checking the roller modules Checking the Roller CleaningClearing the Roller Cleaning Replacement warningSetting the sleep mode Setting the Product IDDisplay Panel Instructions ´ Other display explanations Display ContentDocuments Loading Documents on the ADFCarefully align the top left ends Portrait Loading Documents on the ADFTypes of documents to avoid for the ADF If the document is bent or folded, straighten it ºWhen scanning with the flatbed one timeLoading Documents on the Flatbed Open the document coverPull the exit document stopper towards ºWhen scanning with the flatbed repeatedlyLoading Documents on the Flatbed Close the document cover gentlyºScanning thick documents Insert the document into the paper slot Feeding a Document ManuallySet the manual feed selector to Manual Match the document guide with the size of the documentOthers ºHow to use the control sheetºRemoving paper jams from the feed part Clearing Paper JamsClearing Paper Jams ºRemoving paper jams from the exit path ºInside the scanner Cleaning the UnitºCleaning the rollers ºOutside of the scannerCleaning the Unit Close the front door Close the ADF door Cleaning the Unit Glass, sensor plate and sensor roller Clean the scanning section glass, CISLower sensor roller ´ Re-attachment of the sensor rollerSee on Cleaning the Unit ºDocument glass and cover sheetºRoller cleaning paper Open it Using your fingers, hold the paper feedReplacing Consumable Roller Modules Conveyor and pull it towards you toPull the gear side in the direction Replacing Consumable Roller ModulesHold the paper feed roller module gear Kit KV-SS044, and take out Close the paper feed conveyor As shown in the diagram to the rightTilt the paper feed conveyor at a slight Angle pointing downward and attach itOptional Roller Exchange Kit Take out the retard roller moduleClose the conveyor by pushing it into the unit Pack the scanner Repacking InstructionsPlease Note Materials RequiredKV-S6050W KV-S6055W SpecificationsKV-S6050WU KV-S6055WU SpecificationsSymptom Possible Cause Remedy TroubleshootingTroubleshooting Possible Cause Remedy TroubleshootingLCD Index Index Panasonic Canada Inc