Panasonic KV-S6050WU, KV-S6055WU installation manual Close the front door

Page 46

Cleaning the Unit

4 Pull the exit document stopper towards you and use your hand to pull the front door release towards you. Then open the front door completely.

Front door

Front door

Front door release (Inside the front door )

Front door release

Exit document stopper

5 Use the accessory roller cleaning paper (KV-SS03) to remove the dirt from the surfaces of all rollers.

•When wiping off the dirt, hold the rollers to prevent them from rotating. Wipe the rollers completely from one end to the other. Be sure to wipe in the directions of the arrows shown on the diagram to the right.

•The rollers to be cleaned are shaded.

•Wipe in the direction of the arrows.

Conveyor rollers

Sensor roller

Rollers

6 Close the front door.

• Push both sides of the front door down gently until it clicks into place.

• Do not close the front door holding the hopper extension tray.

Hopper extension tray

46

Image 46

Contents Model No. KV-S6050W / KV-S6055W KV-S6050WU / KV-S6055WU Memory RAM ºSystem requirementsScsi board Table of Contents Warnung For United States onlyAvertissement HinweisSvenska How to replace the fuse For United Kingdom onlyEnglish For roller cleaning paper Advertencia Precautions Precautions ³Power SourcePrecautions ºCD-ROM Component Identification Standard mark Document glass CIS glass Component IdentificationCover sheet Scanning section glassDisplay Panel Instructions ºDisplay panel and keysTurn the power on while pressing Display Panel Instructions ºSetting the languageHome key Content Display Panel Instructions ºSetting the scannerScan menu Display Panel Instructions Counter menu Imprinter menuOthers menu Scsi IDDisplay Panel Instructions ´ Operation Display Panel Instructions ´ Actual settings Scan setting menu by pressing the Scan keyBack side brightness Front side halftoneBack side dropout color Back side image emphasisNoise reduction Scanning modeBack side halftone Double feed detectionSetting the Detect Skew Setting the Double Feed detector ActionSetting the Double Feed detector Sensitivity Feed speedLoad scanning setting Save Scanning Settings Select memorySave Scanning Settings Scanning methodCounter setting menu by pressing the Counter key Setting the imprinter data Imprinter setting menu by pressing the Imprint keyNumber, item and default display Contents Setting the imprinter positionSetting the imprinter orientation Otherssetting menu by pressing the Others key Replacement warning Checking the Roller CleaningClearing the Roller Cleaning Checking the roller modulesSetting the Product ID Setting the sleep modeDisplay Content Display Panel Instructions ´ Other display explanationsCarefully align the top left ends Loading Documents on the ADFDocuments Loading Documents on the ADF PortraitTypes of documents to avoid for the ADF Open the document cover ºWhen scanning with the flatbed one timeLoading Documents on the Flatbed If the document is bent or folded, straighten itClose the document cover gently ºWhen scanning with the flatbed repeatedlyLoading Documents on the Flatbed Pull the exit document stopper towardsºScanning thick documents Match the document guide with the size of the document Feeding a Document ManuallySet the manual feed selector to Manual Insert the document into the paper slotºHow to use the control sheet OthersClearing Paper Jams ºRemoving paper jams from the feed partClearing Paper Jams ºRemoving paper jams from the exit path ºOutside of the scanner Cleaning the UnitºCleaning the rollers ºInside the scannerCleaning the Unit Close the front door Close the ADF door Cleaning the Unit Clean the scanning section glass, CIS Glass, sensor plate and sensor roller´ Re-attachment of the sensor roller Lower sensor rollerºRoller cleaning paper Cleaning the Unit ºDocument glass and cover sheetSee on Conveyor and pull it towards you to Using your ﬁngers, hold the paper feedReplacing Consumable Roller Modules Open itHold the paper feed roller module gear Replacing Consumable Roller ModulesPull the gear side in the direction Kit KV-SS044, and take out Angle pointing downward and attach it As shown in the diagram to the rightTilt the paper feed conveyor at a slight Close the paper feed conveyorTake out the retard roller module Optional Roller Exchange KitClose the conveyor by pushing it into the unit Materials Required Repacking InstructionsPlease Note Pack the scannerSpecifications KV-S6050W KV-S6055WSpecifications KV-S6050WU KV-S6055WUTroubleshooting Symptom Possible Cause RemedyTroubleshooting Troubleshooting Possible Cause RemedyLCD Index Index Panasonic Canada Inc