Panasonic KV-S6055WU, KV-S6050WU installation manual Others menu, Scsi ID

Page 20

Display Panel Instructions

Others menu

	No.	Item	LCD	Content	Page

				Displays the ﬁrmware version of the mechanical
	01	Checking the version	Version	control, pre-imprinter or post-imprinter.
	01	Checking the version	Version	If an optional imprinter is not installed, the imprinter
				If an optional imprinter is not installed, the imprinter
				version will not be displayed.

				Selects whether the buzzer is turned on or off.
				If selection is in the “ON” position:
	02	Setting the buzzer	Buzzer	When pressing a key, one short beep will be heard.
	02	Setting the buzzer	Buzzer	When there is an error, 5 short beep will be heard.
				When there is an error, 5 short beep will be heard.
				When scanning is completed correctly, one long beep
				will be heard.	30

	03	Setting the SCSI ID	SCSI ID	Sets the SCSI ID No.
	03	Setting the SCSI ID	SCSI ID	Sets the SCSI ID No.

				Set “Enable” or “Disable”.
	04	Setting the terminator	Terminator	“Enable”: If last device on chain
				“Disable”: If between devices

				• Changes the maximum value of the synchronous
		Setting the transfer		transfer rate of the SCSI interface.
	05	Setting the transfer	Transfer Rate	• Lower the synchronous transfer rate to 10 Mbytes/
	05	rate	Transfer Rate	• Lower the synchronous transfer rate to 10 Mbytes/
		rate		sec. if the computer has failed to recognize the
				sec. if the computer has failed to recognize the
				scanner or the scanner fails to operate properly.

		Checking the roller		The alarm tells you it is time to check roller.
		Checking the roller	Clean Roller	If it is near 100%, clean the roller. See “Cleaning the
		cleaning warning	Clean Roller	If it is near 100%, clean the roller. See “Cleaning the
	06	cleaning warning		Unit” on page 44.
				Unit” on page 44.

		Clearing the roller	Clean Roller	Clear the “Clean Roller Warning²²%” display.
		cleaning warning	Clean Roller	Clear the “Clean Roller Warning²²%” display.
		cleaning warning

		Checking the roller		The alarm tells you the roller needs to be changed.	31
		Checking the roller		If it is near 100%, replace the paper feed roller module
		modules replacement	Replace Roll.	If it is near 100%, replace the paper feed roller module
		modules replacement	Replace Roll.	and retard roller module. See “Replacing Consumable”
		warning		and retard roller module. See “Replacing Consumable”
	07	warning		on page 52.
				on page 52.

		Clearing the roller
		modules replacement	Replace Roll.	Clear the “Replace Roll. Warning²²%” display.
		warning

				Selects the product ID. The product ID setting depends
	08	Setting the product ID	Product ID	on the host computer scanner application you are
	08	Setting the product ID	Product ID	using.
				using.	32
				Allows scanner to emulate other Panasonic scanner.	32

	09	Setting the sleep	Sleep Mode	Sets the time until sleep mode turns ON.
	09	mode	Sleep Mode	Sets the time until sleep mode turns ON.
		mode

20

Image 20

Contents Model No. KV-S6050W / KV-S6055W KV-S6050WU / KV-S6055WU Scsi board ºSystem requirementsMemory RAM Table of Contents For United States only AvertissementWarnung HinweisSvenska How to replace the fuse For United Kingdom onlyEnglish For roller cleaning paper Advertencia Precautions Precautions ³Power SourcePrecautions ºCD-ROM Component Identification Component Identification Cover sheetStandard mark Document glass CIS glass Scanning section glassDisplay Panel Instructions ºDisplay panel and keysHome key Display Panel Instructions ºSetting the languageTurn the power on while pressing Scan menu Display Panel Instructions ºSetting the scannerContent Display Panel Instructions Counter menu Imprinter menuOthers menu Scsi IDDisplay Panel Instructions ´ Operation Display Panel Instructions ´ Actual settings Scan setting menu by pressing the Scan keyFront side halftone Back side dropout colorBack side brightness Back side image emphasisScanning mode Back side halftoneNoise reduction Double feed detectionSetting the Double Feed detector Action Setting the Double Feed detector SensitivitySetting the Detect Skew Feed speedSave Scanning Settings Select memory Save Scanning SettingsLoad scanning setting Scanning methodCounter setting menu by pressing the Counter key Imprinter setting menu by pressing the Imprint key Number, item and default display ContentsSetting the imprinter data Setting the imprinter positionSetting the imprinter orientation Otherssetting menu by pressing the Others key Checking the Roller Cleaning Clearing the Roller CleaningReplacement warning Checking the roller modulesSetting the Product ID Setting the sleep modeDisplay Content Display Panel Instructions ´ Other display explanationsDocuments Loading Documents on the ADFCarefully align the top left ends Loading Documents on the ADF PortraitTypes of documents to avoid for the ADF ºWhen scanning with the flatbed one time Loading Documents on the FlatbedOpen the document cover If the document is bent or folded, straighten itºWhen scanning with the flatbed repeatedly Loading Documents on the FlatbedClose the document cover gently Pull the exit document stopper towardsºScanning thick documents Feeding a Document Manually Set the manual feed selector to ManualMatch the document guide with the size of the document Insert the document into the paper slotºHow to use the control sheet OthersClearing Paper Jams ºRemoving paper jams from the feed partClearing Paper Jams ºRemoving paper jams from the exit path Cleaning the Unit ºCleaning the rollersºOutside of the scanner ºInside the scannerCleaning the Unit Close the front door Close the ADF door Cleaning the Unit Clean the scanning section glass, CIS Glass, sensor plate and sensor roller´ Re-attachment of the sensor roller Lower sensor rollerSee on Cleaning the Unit ºDocument glass and cover sheetºRoller cleaning paper Using your ﬁngers, hold the paper feed Replacing Consumable Roller ModulesConveyor and pull it towards you to Open itPull the gear side in the direction Replacing Consumable Roller ModulesHold the paper feed roller module gear Kit KV-SS044, and take out As shown in the diagram to the right Tilt the paper feed conveyor at a slightAngle pointing downward and attach it Close the paper feed conveyorTake out the retard roller module Optional Roller Exchange KitClose the conveyor by pushing it into the unit Repacking Instructions Please NoteMaterials Required Pack the scannerSpecifications KV-S6050W KV-S6055WSpecifications KV-S6050WU KV-S6055WUTroubleshooting Symptom Possible Cause RemedyTroubleshooting Troubleshooting Possible Cause RemedyLCD Index Index Panasonic Canada Inc