Loading Documents on the ADF
4 Place the documents on the hopper with the side to be scanned facing up. Then push them in the direction of the arrow until they stop.
•Place the documents on the hopper by matching them with the left side of the hopper as shown in the diagrams at the right.
The amount of documents should not exceed the limit mark on the document guide. This may cause a paper jam or skew.
•For different sized documents, place them with the top left ends facing the left side of the hopper.
Portrait
Fill indicator (Limit mark)
Landscape
5 | Adjust the document guide to the size |
of the document to be scanned. |
Adjust the exit document stopper to the size of the document to be output.
Document guide
Exit document stopper
35