Panasonic KV-S6055WU, KV-S6050WU Take out the retard roller module, Optional Roller Exchange Kit

Page 56

Replacing Consumable Roller Modules

11 Pull the right side of the shaft in the direction of arrow (1), and hold it there.

Pull the retard roller module in the direction of arrow (2), and then remove it.

Retard roller module

2

1

Shaft

12	Take out the retard roller module in the
	optional “Roller Exchange Kit

(KV-SS044)”.

For supplies and accessories:

Call 1-800-346-4768 (U.S.A. only) or your dealer.

13 Pull the right side of the shaft in the direction of arrow (1) and hold it there.

Retard roller module

Attach the new retard roller module as shown in the direction of arrow (2). Return the right side of the shaft as shown in the direction of arrow (3).

•Conﬁrm if pin A and pin B are inserted in their notches correctly.

•Attach the retard roller module so that the notch A is on the left side.

2

Notch A

Pin A

1

Shaft

3

Pin B

Notch B

When the pin is not inserted in the notch properly, it may cause double feeding or a paper jam.

56

Image 56

Contents Model No. KV-S6050W / KV-S6055W KV-S6050WU / KV-S6055WU Scsi board ºSystem requirementsMemory RAM Table of Contents For United States only AvertissementWarnung HinweisSvenska How to replace the fuse For United Kingdom onlyEnglish For roller cleaning paper Advertencia Precautions Precautions ³Power SourcePrecautions ºCD-ROM Component Identification Component Identification Cover sheetStandard mark Document glass CIS glass Scanning section glassDisplay Panel Instructions ºDisplay panel and keysHome key Display Panel Instructions ºSetting the languageTurn the power on while pressing Scan menu Display Panel Instructions ºSetting the scannerContent Display Panel Instructions Counter menu Imprinter menuOthers menu Scsi IDDisplay Panel Instructions ´ Operation Display Panel Instructions ´ Actual settings Scan setting menu by pressing the Scan keyFront side halftone Back side dropout colorBack side brightness Back side image emphasisScanning mode Back side halftoneNoise reduction Double feed detectionSetting the Double Feed detector Action Setting the Double Feed detector SensitivitySetting the Detect Skew Feed speedSave Scanning Settings Select memory Save Scanning SettingsLoad scanning setting Scanning methodCounter setting menu by pressing the Counter key Imprinter setting menu by pressing the Imprint key Number, item and default display ContentsSetting the imprinter data Setting the imprinter positionSetting the imprinter orientation Otherssetting menu by pressing the Others key Checking the Roller Cleaning Clearing the Roller CleaningReplacement warning Checking the roller modulesSetting the Product ID Setting the sleep modeDisplay Content Display Panel Instructions ´ Other display explanationsDocuments Loading Documents on the ADFCarefully align the top left ends Loading Documents on the ADF PortraitTypes of documents to avoid for the ADF ºWhen scanning with the flatbed one time Loading Documents on the FlatbedOpen the document cover If the document is bent or folded, straighten itºWhen scanning with the flatbed repeatedly Loading Documents on the FlatbedClose the document cover gently Pull the exit document stopper towardsºScanning thick documents Feeding a Document Manually Set the manual feed selector to ManualMatch the document guide with the size of the document Insert the document into the paper slotºHow to use the control sheet OthersClearing Paper Jams ºRemoving paper jams from the feed partClearing Paper Jams ºRemoving paper jams from the exit path Cleaning the Unit ºCleaning the rollersºOutside of the scanner ºInside the scannerCleaning the Unit Close the front door Close the ADF door Cleaning the Unit Clean the scanning section glass, CIS Glass, sensor plate and sensor roller´ Re-attachment of the sensor roller Lower sensor rollerSee on Cleaning the Unit ºDocument glass and cover sheetºRoller cleaning paper Using your ﬁngers, hold the paper feed Replacing Consumable Roller ModulesConveyor and pull it towards you to Open itPull the gear side in the direction Replacing Consumable Roller ModulesHold the paper feed roller module gear Kit KV-SS044, and take out As shown in the diagram to the right Tilt the paper feed conveyor at a slightAngle pointing downward and attach it Close the paper feed conveyorTake out the retard roller module Optional Roller Exchange KitClose the conveyor by pushing it into the unit Repacking Instructions Please NoteMaterials Required Pack the scannerSpecifications KV-S6050W KV-S6055WSpecifications KV-S6050WU KV-S6055WUTroubleshooting Symptom Possible Cause RemedyTroubleshooting Troubleshooting Possible Cause RemedyLCD Index Index Panasonic Canada Inc