Panasonic KV-S6055WU, KV-S6050WU Display Panel Instructions, ºDisplay panel and keys

Page 15

Display Panel Instructions

The required settings must be selected prior to scanning.

Information and conditions are shown on the LCD (Liquid Crystal Display).

R e a d y

ºDisplay panel and keys

SCAN

COUNTER

 

 

HOME IMPRINT

OTHERS

READY/

MODE

 

 

ERROR

 

 

 

 

SELECT

STOP/START

SCAN

: Press to enter the scanning setting menu.

LCD

 

COUNTER

: Press to enter the counter setting menu.

:

Up to 32 characters can be displayed during scanning or setting.

IMPRINT

OTHERS

HOME

STOP / START

: Press to enter the imprinter setting menu.

3

: Press to advance to the next mode in the

selected menu.

 

 

: Press to enter “others” setting menu.

4

: Press to return to the previous mode in

the selected menu.

 

 

: Press to exit from the setting section and

 

 

return to the ready status.

1

: Press to advance to the next value in the

Also, this function can change the display

selected mode.

 

language.

 

 

: Press to start or stop scanning a document

2

: Press to return to the previous value in

or batch of documents.

the selected mode.

 

15

Page 14 Page 16
Image 15
Page 14 Page 16
Contents Model No. KV-S6050W / KV-S6055W KV-S6050WU / KV-S6055WU ºSystem requirements Memory RAMScsi board Table of Contents Hinweis For United States onlyAvertissement WarnungSvenska For United Kingdom only How to replace the fuseEnglish For roller cleaning paper Advertencia Precautions ³Power Source PrecautionsPrecautions ºCD-ROM Component Identification Scanning section glass Component IdentificationCover sheet Standard mark Document glass CIS glassºDisplay panel and keys Display Panel InstructionsDisplay Panel Instructions ºSetting the language Turn the power on while pressingHome key Display Panel Instructions ºSetting the scanner ContentScan menu Display Panel Instructions Imprinter menu Counter menuScsi ID Others menuDisplay Panel Instructions ´ Operation Scan setting menu by pressing the Scan key Display Panel Instructions ´ Actual settingsBack side image emphasis Front side halftoneBack side dropout color Back side brightnessDouble feed detection Scanning modeBack side halftone Noise reductionFeed speed Setting the Double Feed detector ActionSetting the Double Feed detector Sensitivity Setting the Detect SkewScanning method Save Scanning Settings Select memorySave Scanning Settings Load scanning settingCounter setting menu by pressing the Counter key Setting the imprinter position Imprinter setting menu by pressing the Imprint keyNumber, item and default display Contents Setting the imprinter dataSetting the imprinter orientation Otherssetting menu by pressing the Others key Checking the roller modules Checking the Roller CleaningClearing the Roller Cleaning Replacement warningSetting the sleep mode Setting the Product IDDisplay Panel Instructions ´ Other display explanations Display ContentLoading Documents on the ADF Carefully align the top left endsDocuments Portrait Loading Documents on the ADFTypes of documents to avoid for the ADF If the document is bent or folded, straighten it ºWhen scanning with the flatbed one timeLoading Documents on the Flatbed Open the document coverPull the exit document stopper towards ºWhen scanning with the flatbed repeatedlyLoading Documents on the Flatbed Close the document cover gentlyºScanning thick documents Insert the document into the paper slot Feeding a Document ManuallySet the manual feed selector to Manual Match the document guide with the size of the documentOthers ºHow to use the control sheetºRemoving paper jams from the feed part Clearing Paper JamsClearing Paper Jams ºRemoving paper jams from the exit path ºInside the scanner Cleaning the UnitºCleaning the rollers ºOutside of the scannerCleaning the Unit Close the front door Close the ADF door Cleaning the Unit Glass, sensor plate and sensor roller Clean the scanning section glass, CISLower sensor roller ´ Re-attachment of the sensor rollerCleaning the Unit ºDocument glass and cover sheet ºRoller cleaning paperSee on Open it Using your fingers, hold the paper feedReplacing Consumable Roller Modules Conveyor and pull it towards you toReplacing Consumable Roller Modules Hold the paper feed roller module gearPull the gear side in the direction Kit KV-SS044, and take out Close the paper feed conveyor As shown in the diagram to the rightTilt the paper feed conveyor at a slight Angle pointing downward and attach itOptional Roller Exchange Kit Take out the retard roller moduleClose the conveyor by pushing it into the unit Pack the scanner Repacking InstructionsPlease Note Materials RequiredKV-S6050W KV-S6055W SpecificationsKV-S6050WU KV-S6055WU SpecificationsSymptom Possible Cause Remedy TroubleshootingTroubleshooting Possible Cause Remedy TroubleshootingLCD Index Index Panasonic Canada Inc
Top Page Image Contents