Panasonic TQBJ0303-1 manual Menu Navigation, Navigating through the Menu, JJOperating procedure

Menu Navigation

Navigating through the MENU

JJOperating procedure

1111 Press the MENU button.

The main menu is displayed.

PICTURE		PICTURE MODE	STANDARD
POSITION		CONTRAST
LANGUAGE		BRIGHTNESS
DISPLAY OPTION		COLOR
PROJECTOR SETUP		TINT
SECURITY		SHARPNESS
NETWORK		COLOR TEMPERATURE	DEFAULT
		DAYLIGHT VIEW	AUTO
RETURN		STILL MODE	OFF
		NOISE REDUCTION	OFF
SELECT	ENTER	TV-SYSTEM	AUTO

2222 Press ▲▼ to scroll to the required main menu item and press the ENTER button to select.

Select the required menu item from the

PICTURE, POSITION, LANGUAGE, DISPLAY OPTION, PROJECTOR SETUP, SECURITY and NETWORK *1 menu. The selected item is highlighted in orange and displays the sub-menu on the right.

PICTURE		KEYSTONE
POSITION		SHIFT
LANGUAGE		OVER SCAN
DISPLAY OPTION		ASPECT
PROJECTOR SETUP
SECURITY
NETWORK
RETURN
SELECT	ENTER

3333 Press the ENTER button.

You can select a sub-menu item.

PICTURE		KEYSTONE
POSITION		SHIFT
LANGUAGE		OVER SCAN
DISPLAY OPTION		ASPECT
PROJECTOR SETUP
SECURITY
NETWORK
RETURN
SELECT	ENTER

4444 Press ▲▼ buttons to scroll to the required sub-menu item and press ◄► buttons or the ENTER button to adjust.

The selected item is called up and the other menu items disappear from the screen.

KEYSTONE

If there is a lower level, the next level will be displayed.

**** PT-LB90NTE only

Menu Navigation

Remarks

zzPress the MENU or RETURN button to return to the previous menu. Press repeatedly to escape from the menu mode and return to the projection.

zzSome items and functions may not be adjusted or available, depending on the selected input signals. zzSome settings are adjustable without any signals.

zzCalled up item will disappear after 5 seconds without any operation and return to the menu mode.

zzFor the sub-menu items, see “Sub-menu” in the “ON-SCREEN MENU”. (Æpage 30)

JJResetting to the factory default settings.

You can reset most of the customised settings to the factory defaults by pressing the DEFAULT button of the remote control.

Press button.

The operation depends on the screen displayed currently.

QQ While the sub-menu screen is displayed:

The items of the sub-menu displayed currently are reset to the factory default settings.

QQ While the called up item screen is displayed:

Only the item adjusted currently is reset to the fac- tory default setting.

KEYSTONE

Remarks

zzYou cannot reset all the settings at a time to the factory default settings.

To reset all the settings to the factory defaults, see “INITIALIZE ALL” in the “PROJECTOR SETUP menu”. (Æpage 44)

zzSome menu items are not available to reset by pressing the DEFAULT button. Adjust each menu item manually.

zzThe triangle mark under the bar indicates factory default setting and the square indicates the current setting.

The triangle mark position varies by the selected input signals.

Current setting

Default setting

Settings

ENGLISH - 29