Panasonic TQBJ0303-1 manual DISPLAYOPTIOPTIONmenu menu, ON-SCREEN Display, Startup Logo

DISPLAYOPTIOPTIONmenu menu

Settings

Navigating through the MENU (Æpage 29), select DISPLAY OPTION from the main menu and then select the required item from the sub-menu.

zzSet the selected item with◄►buttons.

Remote control Control panel

ON-SCREEN DISPLAY

You can set the on-screen display.

Change setting Change setting

JJINPUT GUIDE

When you change the input method, the guidance appears in the upper right corner of the screen. The following display methods are available.

	Display the input method by graphic.
DETAILED	The INPUT GUIDE will go out after
	10 seconds without any operation.
OFF	Turn off the guidance.
	Display the input method by text.
SIMPLE	The INPUT GUIDE will go out after
	5 seconds without any operation.

Remarks

zzIf you select the computer terminals which have no signals while INPUT GUIDE is set to DETAILED, the computer connection guidance will be displayed. If you want to turn off the guidance, select SIMPLE or OFF.

QQComputer connection guidance

You can switch the signals which output from the COMPUTER1/COMPUTER2 terminal by pressing the following computer key commands.

Remarks

zzThe key commands are depending on the manufacturers. Please refer to the instructions which were provided with the computers for more detailed information.

JJOSD DESIGN

You can change the background of the on-screen menu (OSD).

TYPE1	Semi transparent black
TYPE2	Solid blue
TYPE3	Semi transparent dark blue

JJWARNING MESSAGE

You can choose to display or not to display the warning massages.

ON	Warning messages will be displayed
OFF	No display

Note

zzWhen the WARNING MESSAGE is set to OFF, use the projector with utmost care due to the most of warning messages will not be displayed.

STARTUP LOGO

You can set to display the Panasonic logo, your own image or Pre-set letters, when starting up the projector.

Change setting Change setting

ON	Display “Panasonic” logo
TEXT	Display the original text
USER	Display the image registered by
	user
OFF	No display

Remarks

zzIf TEXT is selected, the input letters are displayed when starting up the projector. You can display

2 lines of original text which contain up to 40 characters each.

zzIf USER is selected, the image transferred by the Logo Transfer Software is displayed when starting

	Image output
Manufacturer	selection
	command
Panasonic	+
NEC
Acer
HP	+
SHARP
TOSHIBA
lenovo	+
SONY

Image output

Manufacturer selection command

DELL	+
EPSON
FUJITSU	+
Apple

up the projector. (You can download the Logo Transfer Software from the Panasonic Projector website (http://panasonic.net/avc/projector/ download/).)

zzSTARTUP LOGO will be displayed for 30 seconds.

38 - ENGLISH