Panasonic TQBJ0303-1 manual Projector Setup menuPROJECTOR Setup menu

Page 41

PROJECTOR SETUP menuPROJECTOR SETUP menu

Navigating through the MENU (Æpage 29), select

PROJECTOR SETUP from the main menu and then select the required item from the sub-menu.

zzSet the selected item with◄►buttons.

Remote control

Control panel

STATUS

You can check the using status of the projector.

JJSIGNAL

zzNAME: Name of input signal

zzFREQUENCY: Scanning frequency of input signal

JJRUNTIME

zzPROJECTOR: Display current usage time of projector

zzLAMP: Display current usage time of lamp

NO SIGNAL SHUT-OFF

If no image signal is input for the time set with the timer, the projector will enter into standby mode automatically.

Change setting Change setting

DISABLE

NO SIGNAL SHUT-OFF is disabled

15 - 60 MIN.

Timer can be set in intervals of 5

minutes

 

INITIAL START UP

You can set the starting method when the mains plug is connected to mains socket.

Change setting Change setting

LAST MEMORY

Projector starts from the last image

before the mains plug was

 

disconnected

STANDBY

Projector starts in the standby

mode

 

ON

Projector starts immediately

INSTALLATION

When installing the projector, select the projection method according to the projector position. (Æpage 18)

Change setting Change setting

FRONT/

Setting on a desk/floor and

DESK

projecting from front

FRONT/

Mounting in the ceiling with a ceiling

mount bracket (sold separately) and

CEILING

projecting from front

 

REAR/DESK

Setting on a desk/floor and projecting

from rear (Translucent screen is

 

required)

 

Mounting in the ceiling with a ceiling

REAR/CEILING

mount bracket (sold separately) and

projecting from rear (Translucent

 

screen is required)

HIGH ALTITUDE MODE

If you use the projector at high elevation, the HIGH ALTITUDE MODE setting need to be ON to set the fan speed high.

Change setting Change setting

OFF

For use in normal environment

ON

For use at high altitude

Remarks

zzAt 1 400 -2 700 m (4 593 - 8 858 ft) sea level, the setting must be ON.

zzThe loudness of fan noise depends on the HIGH ALTITUDE MODE setting.

Settings

ENGLISH - 41

Page 40 Page 42
Image 41
Page 40 Page 42
Contents PT-LB90E PT-LB78VE PT-LB75VE Serial number ImportantSafetySafetyNotice NoticeEnvironment care information for users in China Important Safety NoticeFor business users in the European Union Declaration of Conformity DoC Important Safety Notice Declaration of ConformityInformation Contents Settings ContentsMaintenance AppendixPrecautionswith regardwithtoregardsafety to safety Precautions with regard to safety „„Lens Focus Do not put your weight on this projectorDo not place the projector in extremely hot locations Always disconnect all cables before mov- ing the projector„„Take safety measures against fol- lowing incidents Cleaning and maintenanceSecurity DisposalTXFQB02VKJ2 Precautions with regard to safety AccessoriesRead this first Jjinitial SettingRead this first JjlanguageProjector body AboutYourYourProjectorProjectorJJTop and front view JJControl panelJJTerminals About Your ProjectorBack and bottom view Front view About Your Projector Remote controlJJTop view Screen size and throw distance Setting upSetting up Front leg adjusters and throwing angle Setting up Projection methodSetting on a desk/floor Projecting from rear Using translucent screenConnectionsConnections Before connecting to the projectorConnecting example AV equipment Connections Connecting example Computers JJDisconnecting ConnectingJJDirect power off function JJDirect power on functionIndicator status Status Power Lock indicator statusPower indicator status Press the Release button to unlock the Power button Switching the projector on/off Switching on the projectorPress the Power button Connect the mains lead. ÆpageAudio Setting Switching the projector on/off Switching off the projectorPress the Power button again Projecting an image Selecting the input signalProjecting an image Positioning the imageRemotecontrolcontrolope ationoperation Switching the input signalCapturing an image Stopping the projection temporarilyResetting to the factory default settings Setting up the image position automaticallyControlling the volume of the speaker JJINDEX-WINDOW displayPress the Enter button Select OK JJButton functions in digital zoom modeJJResetting to the factory default settings JJOperating procedureMenu Navigation Navigating through the MenuSub-menu ON-SCREEN MenuMain menu JjpicturePosition Jjprojector SetupJjdisplay Option SecurityColor Temperature Picture ModeContrast BrightnessDaylight View Still ModeNoise Reduction TV-SYSTEMRealtime Keystone Clock PhaseKeystone ShiftPosition menu Over ScanAspect Jjthrough Frame LockJJS43 Language menu Language menuStartup Logo DISPLAYOPTIOPTIONmenu menuON-SCREEN Display Signal Search Auto SetupWide Mode Sxga ModeOther Functions Projector Setup menuPROJECTOR Setup menu Standby Mode Projector Setup menuLamp Power Lamp RuntimeFunction Button Audio SettingChange Pattern Test PatternInitialize ALL Password Change PasswordSecurity menu Text DisplayControl Device Setup Menu Lock PasswordRemote Controller Menu LockJjwireless LAN Jjwired LANJjinput Password Jjstatus Jjpassword ChangeJjtemp indicator Lamp indicatorCare and Replacement Care and ReplacementBefore Care and Replacement Cleaning the projectorJJNote on lamp unit replacement Care and Replacement Replacing the Lamp unitJJLamp unit replacement time JJLamp unitJJLamp replacement procedure Lamp runtime is reset to TroubleshootingTroubleshooting This projector can project the following image signals TechnicalInformatiInformation List of compatible signalsJJCommunication settings JJPin assignments and signal namesTechnical Information Serial terminal JJConnectionControl commands Cable specificationsTechnical Information LAN terminalComputer Audio SpecificationsSpecificationsComputer PT-LB90NTE Ceiling mount bracket safeguardsSpecifications Index IndexUnit mm DimensionsTrademark acknowledgements
Top Page Image Contents