Precautions with regard to safety
Do not look into or touch the lights emit- ted from the lens while the projector is being used.
Doing so can cause burns or loss of sight.
zzStrong light is emitted from the projector’s lens. Do not look or place your hands directly into this light. zzBe especially careful not to let young children look into the lens. In addition, turn off the power and
disconnect the mains plug when you are away from the projector.
Do not insert any foreign objects into the projector.
Doing so will cause fire or electric shocks.
zzDo not insert any metal objects or flammable ob- jects into the projector or drop them onto the pro- jector.
Never attempt to remodel or disassemble the projector.
High voltages can cause fire or electric shocks. For any inspection, adjustment and repair work, please contact an Authorised Service Centre.
ACCESSORIES
Do not use or handle the batteries im- properly, and refer to the following.
Failure to observe this will cause burns, batteries to
leak, overheat, explode or catch fire. zzDo not use unspecified batteries.
zzUse manganese batteries or alkaline batteries but not rechargeable batteries.
zzDo not dissemble dry cell batteries.
zzDo not heat the batteries or place them into water or fire.
zzDo not allow the + and – terminals of the batteries to come into contact with metallic objects such as necklaces or hairpins.
zzDo not store batteries together with metallic ob- jects.
zzStore the batteries in a plastic bag and keep them away from metallic objects.
zzMake sure the polarities (+ and
zzDo not use a new battery together with an old bat- tery or mix different types of batteries.
zzDo not use batteries with the outer cover peeling away or removed.
zzRemove the empty batteries from the remote con- trol at once.
zzInsulate the battery using tape or something similar before disposal.
Do not allow children to reach the batter- ies.
zzThe battery can cause death by suffocation if swal- lowed.
zzIf swallowed, seek medical advice immediately.
If the battery fluid leaks, do not touch it with bare hands, and take the following measures if necessary.
zzBattery fluid on your skin or clothing could result in skin inflammation or injury.
Rinse with clean water and seek medical advice immediately.
zzBattery fluid coming in contact with your eyes could result in loss of sight.
In this case, do not rub your eyes. Rinse with clean water and seek medical advice immediately.
Do not disassemble the lamp unit.
If the lamp breaks, it could cause injury.
Lamp replacement
The lamp has high internal pressure. If improperly handled, an explosion and severe injury or accidents will result.
zzReplacement of the lamp should be carried out by a qualified technician.
zzThe lamp can easily explode if struck against hard objects or dropped.
zzBefore replacing the lamp, be sure to disconnect the mains plug from the mains socket.
Electric shocks or explosions can result if this is not done.
zzWhen replacing the lamp, allow it to cool for at least one hour before handling it otherwise it can cause burns.
Do not allow infants or pets to touch the remote control unit.
zzKeep the remote control unit out of the reach of infants and pets after using it.
CAUTION
POWER
When disconnecting the mains lead, hold the plug, not the lead.
If the mains lead itself is pulled, the lead will become damaged, and fire,
When not using the projector for an ex- tended period of time, disconnect the mains plug from the mains socket and remove the batteries from the remote control.
Disconnect the mains plug from the mains socket before carrying out any cleaning.
Electric shocks can result if this is not done.
Important Information
ENGLISH - 9