Precautionswith regardwithtoregardsafety to safety
Important Information
WARNING
POWER
The mains socket or the circuit breaker shall be installed near the equipment and shall be easily accessible when problems occur. If the followings problems occur, cut off the power supply immediately.
Continued use of the projector in these conditions will
result in fire or electric shock.
zzIf foreign objects or water get inside the projector, cut off the power supply.
zzIf the projector is dropped or the cabinet is broken, cut off the power supply.
zzIf you notice smoke, strange smells or noise com- ing from the projector, cut off the power supply.
Please contact an Authorised Service Centre for repairs, and do not attempt to repair the projector yourself.
During a thunderstorm, do not touch the projector or the cable.
Electric shocks can result.
Do not do anything that might damage the mains lead or the mains plug.
If the mains lead is used while damaged, electric
shocks,
zzDo not damage the mains lead, make any modifi- cations to it, place it near any hot objects, bend it excessively, twist it, pull it, place heavy objects on top of it or wrap it into a bundle.
Ask an Authorised Service Centre to carry out any repairs to the mains lead that might be necessary.
Insert the mains plug securely into the mains socket.
If the plug is not inserted correctly, electric shocks or overheating will result.
zzDo not use anything other than the provided mains lead.
zzDo not use plugs which are damaged or mains sockets which are coming loose from the wall.
Clean the mains plug regularly to prevent it from becoming covered in dust.
Failure to observe this will cause a fire.
zzIf dust builds up on the mains plug, the resulting humidity can damage the insulation.
zzIf not using the projector for an extended period of time, pull the mains plug out from the mains socket.
Pull the mains plug out from the mains socket and wipe it with a dry cloth regularly.
ON USE/INSTALLATION
Do not place liquid containers on top of the projector.
If water spills onto the projector or gets inside it, fire or electric shocks will result.
If any water gets inside the projector, contact an Authorised Service Centre.
Do not place the projector on soft materi- als such as carpets or sponge mats.
Doing so will cause the projector to overheat, which can cause burns, fire or damage to the projector.
Do not set up the projector in humid or dusty places or in places where the pro- jector may come into contact with oily smoke or steam, ex a bathroom.
Using the projector under such conditions will result in fire, electric shocks or components deterioration. Components deterioration (such as ceiling mount brackets) may cause the projector which is mounted on the ceiling to fall down.
Do not install this projector in a place which is not strong enough to take the full weight of the projector or on top of a surface which is sloped or unstable.
Failure to observe this will cause projector to fall down or tip over the projector, and severe injury or damage could result.
Do not place another projector or other heavy objects on top of the projector.
Failure to observe this will cause the projector to become unbalanced and fall, which could result in damage or injury. The projector will be damaged or deformed.
Installation work (such as ceiling sus- pension) should only be carried out by a qualified technician.
If installation is not carried out and secured correctly it can cause injury or accidents, such as electric shocks. zzDo not use anything other than an Authorised ceil-
ing mount bracket.
Do not cover the air inlet port or the air outlet port.
Doing so will cause the projector to overheat, which
can cause fire or damage to the projector.
zzDo not place the projector in narrow, badly venti- lated places such as closets or bookshelves.
zzDo not place the projector on cloth or papers, as these materials could be drawn into the air inlet port.
Do not handle the mains plug with wet hands.
Failure to observe this will result in electric shocks.
Do not overload the mains socket.
If the power supply is overloaded (ex., by using too many adapters), overheating may occur and fire will result.
Do not place your hands or other objects close to the air outlet port.
Doing so will cause burns or damage your hands or other objects.
zzHeated air comes out of the air outlet port. Do not place your hands or face, or objects which cannot withstand heat close to this port.
8 - ENGLISH