Panasonic TQBJ0302 manual Read this first, Jjlanguage, Jjinitial Setting

Read this first Read this first

When you start the projection for the first time or after the projector is initialised (Æpage 42), the LANGUAGE menu and the INITIAL SETTING menu will be displayed.

Set those menus according to the usage conditions and environment.

The setting can be changed by navigating through the ON SCREEN MENU.

JJLANGUAGE

Select the required language setting. (Æpage 35)

1111 Press ▲▼◄►buttons of the remote control or control panel on the projector to highlight the required language.

PLEASE SELECT LANGUAGE

SELECT

ENTER

2222 Press the ENTER button to proceed to the next INITIAL SETTING menu.

JJINITIAL SETTING

Select the required setting of INSTALLATION and

HIGH ALTITUDE MODE.

1111 Press ▲▼buttons to select the required menu.

2222 Press ◄►buttons to change the settings of INSTALLATION or HIGH ALTITUDE MODE.

INITIAL SETTING
INSTALLATION	FRONT/DESK
HIGH ALTITUDE MODE	OFF
SWITCH TO HIGH ALTITUDE MODE “ON” IF OVER 1400m(4593Ft).
	RETURN
SELECT	ENTER
zzINSTALLATION (Æpage 16, 39)

	FRONT/	Setting on a desk/floor and
	DESK	projecting from front
	FRONT/	Mounting in the ceiling with a ceiling
		mount bracket (sold separately) and
	CEILING	projecting from front
	REAR/	Setting on a desk/floor and
		projecting from rear (Translucent
	DESK
		screen is required)
	REAR/	Mounting in the ceiling with a ceiling
		mount bracket (sold separately) and
	CEILING	projecting from rear (Translucent
		screen is required)
zzHIGH ALTITUDE MODE (Æpage 8, 39)
	OFF	For use in normal environment
	ON	For use at high altitude (above
		1 400 m (4 593 ft))

Preparation

3333 Press the ENTER button to finish.

Remarks

zzTo return to the LANGUAGE menu, press the RETURN button in the INITIAL SETTING menu.

ENGLISH - 11