Panasonic TQBJ0302 manual Before Care and Replacement, Cleaning the projector

Care and Replacement Care and Replacement

Before Care and Replacement

zzBefore cleaning, be sure to turn off the power and disconnect the power plug from the wall outlet. (Æpage 19)

zzBe sure to turn off the power as described in “Switching off the projector”. (Æpage 22)

Cleaning the projector

JJCabinet

Wipe off dirt and dust gently with a soft cloth.

zzIf it is difficult to remove the dirt, soak a cloth with water, wring the cloth well and then wipe the projector. Dry off the projector with dry cloth.

zzDo not use petroleum benzine, thinner, any alcoholic solvent, kitchen detergents or chemical clothes. Failure to observe these may result in altered or damaged surfaces of the projector.

JJLens cover

Make sure no dirt or dust remains on the surface of the lens cover glass. It will be enlarged and projected onto the screen.

Wipe off dirt and dust gently with a lint-free cloth. Do not wipe the lens cover with a cloth which has collected dust.

Note

zzClean the lens cover with special care. Giving a shock may cause serious damage.

JJAir filter

If the air filter is excessively dirty, the internal temperature of the projector increases, the TEMP indicator lights, and the power is turned off. If the power is turned off, the TEMP indicator flashes. Clean the air filter regularly every 100 hours of usage.

1 ) Turn the projector upside down and place it gently on a soft cloth.

zzPlace the projector softly so that it will not be damaged.

zzPress the tab and slightly slide up the air filter to remove.

Tab

Air filter

Remarks

2 ) Clean the air filter.

Vacuum dirt and dust from the air filter.

3 ) Install the air filter.

Maintenance

zzDo not use the projector without attaching the air filter. Otherwise, it will suck in dirt and dust which can cause malfunction.

ENGLISH - 47