Panasonic TQBJ0302 manual Setting up the image position automatically, JJINDEX-WINDOW display

Setting up the image position automatically

When a RGB signal is input, the projector adjusts the SHIFT, DOT CLOCK and CLOCK PHASE automatically.

Press button.

Screen Projected image

Remarks

zzThe SIGNAL SEARCH operation is also performed. (When SIGNAL SEARCH is set to ON)

Remote control operation

Projecting an image

in INDEX-WINDOW mode

You can project an image split in 2 windows as an INDEX WINDOW. One is frozen and stored in memory, and displayed on the screen’s left side while displaying subsequent image continues on the right.

Press button.

Press the RETURN button to escape.

The image being projected when the INDEX- WINDOW button is pressed will be a frozen image.

Projected	Frozen	Continuing
image	image	image

JJINDEX-WINDOW display

(Æpage 37)

zzIf the dot clock frequency is 108 MHz or higher, DOT CLOCK and CLOCK PHASE are not effective. (Æpage 32)

zzIf the projected image is too dark or blurred around the edge, AUTO SETUP may stop the processing before completing the adjustment and return to the previous setting. Project a much clearer or lighter image and try again.

Resetting to the factory default settings

You can reset most of the customised settings to the factory default settings by pressing the DEFAULT button of the remote control.

Press button.

zzFor details, see “Menu Navigation - Navigating through the MENU - Resetting to the factory default settings”. (Æpage 27)

Controlling the volume of the speaker

Press ▲▼ buttons to capture a new image and change the size in 3 ways.

Frozen Continuing

image image

Frozen Continuing

image image

Frozen Continuing

image image

In default, the frozen image is displayed on the left and the subsequent image is displayed on the right. Press ◄► buttons to switch the position.

Frozen Continuing

Image image

Continuing	Frozen
image	Image

Basic Operation

You can control the volume of the built-in speakers and output audio sound.

Press button.

zz+ button: increases the volume

zz- button: decreases the volume

Remarks

zzThe aspect ratio of the image is changed and becomes vertically elongated.

zzIf you change the window size, the aspect ratio of the image is changed. (Æpage 33)

zzWhile in INDEX-WINDOWmode, press the ENTER button to capture a new image and the frozen image window will be updated in a moment.

zzWhen capturing a quick moving picture, perform several times to get a stable picture.

ENGLISH - 25