Panasonic TQBJ0302 manual TechnicalInformatiInformation List of compatible signals

Appendix

TechnicalInformatiInformation

List of compatible signals

This projector can project the following image signals.

	Display resolution		Scanning frequency		Dot clock	Picture	PnP
Mode					frequency			Terminals
	(dots) *1		H (kHz)	V (Hz)		quality *2	availability *3
					(MHz)
NTSC/NTSC4.43/	720 × 480i		15.7	59.9	—	A
PAL-M/PAL60								VIDEO/S-VIDEO
PAL/PAL-N/SECAM	720 × 576i		15.6	50	—	A
525i (480i)	720 × 480i		15.7	59.9	13.5	A
625i (576i)	720 × 576i		15.6	50	13.5	A
525p (480p)	720	× 483	31.5	59.9	27	A		COMPUTER/
625p (576p)	720	× 576	31.3	50	27	A		YPBPR
1 125 (1 080)/60i	1 920 × 1 080i		33.8	60	74.3	A
1 125 (1 080)/50i	1 920 × 1 080i		28.1	50	74.3	A
750 (720)/60p	1 280 × 720		45	60	74.3	A		COMPUTER/
750 (720)/50p	1 280 × 720		37.5	50	74.3	A		YPBPR
VESA	640	× 400	31.5	70.1	25.2	A
	640	× 400	37.9	85.1	31.5	A
	640	× 480	31.5	59.9	25.2	A
VGA	640	× 480	35	66.7	30.2	A
	640	× 480	37.9	72.8	31.5	A
	640	× 480	37.5	75	31.5	A
	640	× 480	43.3	85	36	A
	800	× 600	35.2	56.3	36	A
SVGA	800	× 600	37.9	60.3	40	A
	800	× 600	48.1	72.2	50	A
	800	× 600	46.9	75	49.5	A
	800	× 600	53.7	85.1	56.3	A
MAC	832	× 624	49.7	74.6	57.3	A
	1 024 × 768		39.6	50.1	51.9	AA
XGA	1 024 × 768		48.4	60	65	AA
	1 024 × 768		56.5	70.1	75	AA
	1 024 × 768		60	75	78.8	AA
	1 024 × 768		68.7	85	94.5	AA
MXGA	1 152 × 864		64	71.2	94.2	A		COMPUTER
	1 152 × 864		67.5	74.9	108	A
	1 152 × 864		76.7	85	121.5	B
MAC	1 152 × 870		68.7	75.1	100	A
MSXGA	1 280 × 960		60	60	108	A
SXGA	1 280	× 1 024	64	60	108	A
	1 280	× 1 024	80	75	135	B
	1 280	× 1 024	91.1	85	157.5	B
SXGA60+	1 400	× 1 050	64	60	108	A
	1 400	× 1 050	65.1	59.9	122.4	B
UXGA	1 600	× 1 200	75	60	162	B
WIDE750 (720)	1 280 × 720		44.8	59.9	74.5	A
	1 280 × 720		37.1	49.8	60.5	A
WXGA768	1 280 × 768		39.6	49.9	65.3	A
	1 280 × 768		47.8	59.9	79.5	A
WXGA800	1 280 × 800		41.3	50	68	A
	1 280 × 800		49.1	60.2	69.1	A
	1 280 × 800		49.7	59.8	83.5	A
WXGA+	1 440 × 900		55.9	59.9	106.5	A
WSXGA+	1 680	× 1 050	65.3	60	146.3	B
WUXGA	1 920	× 1 200	74.6	59.9	193.3	B

****The “i” appearing after the resolution indicates an interlaced signal.

****The following symbols are used to indicate picture quality. AA: Maximum picture quality can be obtained.

A: Signals are converted by the image processing circuit before picture is projected.

B: Some loss of data occurs to make projection easier.

****The signals marked with circles () can be applied by plug-and-play device.

52 - ENGLISH