Panasonic PT-AX100E manual Serial terminal, Technical Information, Connection DIN 8 pin male

Page 42

Technical Information

Serial terminal

The serial connector which is on the connector panel of the projector conforms to the RS-232C interface specification, so that the projector can be controlled by a personal computer which is connected to this connecter.

Connection

DIN 8 pin (male)

PC	Serial terminal adapter	Serial terminal
	(ET-ADSER: Optional)
		(male)

NOTE:

You must use only an RS-232C Serial Interface Cable with a ferrite core, type ET-ADSER.

Pin assignments and signal names

Pin No.	Signal name	Contents
C	RXD	Received data
D	GND	Earth
E	TXD	Transmitted data
A
B		Connected internally
F
G		NC
H		NC

Communication settings

Signal level	RS-232C	Character length	8 bits

Sync. method	Asynchronous	Stop bit	1 bit

Baud rate	9 600 bps	X parameter	None

Parity	None	S parameter	None

Appendix

42 - ENGLISH

Image 42

Contents Operating Instructions Important Safety Notice Expose this appliance to rain or moistureImportant Safety Notice Important the Moulded Plug U.K. onlyContents Settings MaintenanceAppendix Precautions with regard to safety Precautions with regard to safety Do not look into the lens while the projector is being usedAlways disconnect all cables before moving the projector Do not put your weight on this projectorDo not cover the air inlet port or the air outlet port Do not place any heavy objects on top of the projectorAccessories Before useBefore use Remote control About Your ProjectorFront, back and top view Top and front view ProjectorAbout Your Projector Control panelBack and bottom view TerminalsSetting up Calculation methods for screen dimensionsScreen size and throw distance Front leg adjuster and throwing angle Setting upProjection method Horizontal shift Adjusting the Shift leverLens shift and positioning Vertical shiftAdjustable projection range Projector location rangeAfter fixing the screen position Connections Connecting with AV devicesConnecting with HDMI/PC Before connection to the projectorConnectingDisconnecting Switching the projector on/offPower indicator Mains leadSwitching the projector on/off Switching on the projectorSwitching off the projector Power indicatorPositioning the image Selecting the input signalProjecting an image Focus ring Zoom ringOperating range Remote control operationInput switching Capturing an imageResetting to the factory default settings Switching the aspect ratioSwitching off the projector automatically Switching the picture modeAdjusting the image Setting your own colour profileCreate a new profile Saving a log setting as a profile Loading saved profilesManaging stored logs Menu Menu NavigationNavigating through Main menuSub-menu Menu NavigationContrast Picture ModePicture Menu BrightnessSharpness Colour TemperatureTint Dynamic IrisFavourite Load Signal ModeFavourite Save NR Noise ReductionPosition Clock PhasePosition Menu DOT ClockPosition Menu Component signalsAspect Aspect ratio options and projection exampleWSS Auto SetupAspect ratio depend on signals Over ScanOption Menu Sleep InstallationLamp Power AltitudeLamp indicator Temp and Lamp IndicatorsLamp indicator Temp indicator Controlling alertsCare and Replacement Before cleaningCleaning your projector When to replace the Lamp unit Care and ReplacementBefore replacing the Lamp unit Resetting the Lamp Runtime Replacing the lamp unitReplacing Troubleshooting List of compatible signals Technical InformationSerial terminal Pin assignments and signal namesCommunication settings Technical InformationControl commands Basic formatInquiry commands Cable specificationsProjector Position Menu 31 H Menu structurePicture Menu 28 H Option Menu 34 HSpecifications NTSC/NTSC 4.43/PAL/PAL-M/PAL-N/SECAMSpecifications SerialDimensions Trademark acknowledgements For business users in the European UnionIndex AltitudeIndex OSD Design OSD Position Over Scan