Connect (cont.)
Easy Wireless Set Up
If the computer has
1Turn on the projector.
2 | Press the [WIRELESS] button on the remote control. |
Input signal is switched to Wireless on the projector. |
([INPUT SELECT] button on the remote control or [INPUT] button on the projector are also available to switch input signals.)
3
4
Turn on the computer.
Click [ ] on the desktop,
or select [Start] → [All Programs] → [Panasonic Wireless Display] → [Wireless Manager mobile edition 3.0].
Wireless Manager ME 3.0 starts up, and the “Select Access Port” window appears.
5Select the network number of the desired projector from [Network].
Projectors powered on in the chosen network group are listed.
6 | Select the desired projectors, and click [OK]. |
The launcher shown below appears and the connection with the projector is |
established. (“Description of the launcher” →See page 23)
The launcher always appears on the computer screen, and can be used to perform various operations.
The launcher appears only on the computer screen and is not projected by the projector.
14