Panasonic PT-LB50NTE manual Connect

Connect (cont.)

•Wireless connection cannot be made between the projector and the computer. (See page 63)

•Automatic connection setting (See page 44)

※1

•When a user logs on a computer without the administrator authority, selectable network number is only [U].

•Depending on the computer and wireless LAN card used, easy wireless set up may not be possible. If this is the case, the [Network] setting of “Select Access Port” window will be switched to [U] automatically. For details of the connection procedure, first close Wireless Manager ME 3.0, and then refer to pages 17-19.

※2

•The initial network number for both the projector and Wireless Manager ME 3.0 is [1]. These numbers must match for the connection.

To check the network number, refer to the wireless menu of the projector.

•When importance is placed on security, select the network number [2]-[4], because WEP (wireless communication encryption) is set on these network numbers.

•Important video/audio data is protected because AES※ encryption processing takes place in advance for all network numbers, even if [ENCRYPTION] is set to [NONE]. ※ “Glossary” (See page 62)

•Other network adapters may not be usable under easy wireless set up connections.

•Connections to other networks connected through the wireless LAN card are broken during easy wireless set up connections.

15