Panasonic PT-LB50NTE manual Connecting through the access point, Turn on the computer

Page 19

Connect (cont.)

Connecting through the access point

You can make the setting for infrastructure mode(connection through the access point); however, confirm to your system administrator on network settings before changing any settings.

“Glossary” (See page 62)

Projector settings

1 Turn on the projector and press the [WIRELESS] button on the remote control.

2Select [USER 1]- [USER 3] from [NETWORK] at the wireless menu and press the [ENTER] button.

3

Set the details of network and select [OK].

As for network setting items, see pages 49-52.

 

Confirm to your system administrator on network settings before changing any

 

settings.

Computer settings

4

Turn on the computer.

5Make the network setting according to your system administrator.

6Connect to your access point.

7Start Wireless Manager ME 3.0, and select [U] from [Network] of “Select Access Port” window.

 

If the projector is not displayed, click [Designate] followed by [ADD], then enter

 

the IP address set in the projector using the “Access Port Registration” window,

 

and click [REGISTER]. (See page 20)

8

Select the desired projector, and click [OK].

The launcher appears and the connection with the projector is established.

(“Description of the launcher” →See page 23)

19

Image 19
Contents Wireless Function Edition Contents Wireless Function Edition Contents Wireless Function Edition Do not use near other wireless equipment Channels that can be used Using the projector outside the countryProject with various methods Live mode See Wireless TransmissionMulti live mode Useful functions Project with multiple projectorsNecessary environment for computers to be connected Check your computerSystem requirements Software InstallationContents on Provided CD-ROM Software InstallationClick Next Click Finish when the window to the right appearsDirectX 9.0c Click DirectX 9.0c onIf you chose B in , follow steps Click Installation Free Set UpInsert provided CD-ROM into the CD-ROM drive Select the destination to save, and click OKHow to connect Select Access Port windowConnect Select the desired projectors, and click OK Easy Wireless Set UpConnect Turn on the computer Click on the desktopConnect When another firewall has been detected See Connection error messagesWhen the Network Bridge setting has been detected See When Windows Firewall has been detected SeeWhen logging on without administrator authority Connect without easy wireless set up② Computer settings Select the desired projector, and click OK Click Start→Log Off and log off from the computer③ Computer operation ① Projector settings Connecting through the access pointTurn on the computer Adding and deleting connections Operations when password entry is required for connectionClick Designate at the Select Access Port Window Other operations for connectionSearching by projector’s ID Click on the launcher Canceling the connectionClick Yes Simple launcher Full launcher Place in notification area Various projection methodsDescription of the launcher Status indicationVarious projection methods Projection mode select buttonsFunction buttons Quitting live mode Live modeSwitching from one style to another Multi live modeHow to switch styles Enlarged display Display the status when no index window is displayedSwitching to a different position Screen multi styleScreen index style Quitting 4-screen index style Toggle between These with Enter button Quitting 16-screen index styleClick of the launcher Multiple Source Live ModeQuitting multiple source live mode Button on the remote control Multiple Source Multi Live ModePress the MULTI-LIVE Select Secondary viewer function Quitting multiple source multi live modeSelective area transmission Useful FunctionsQuitting selective area transmission Secondary display transmission Useful FunctionsQuitting secondary display transmission Secondary viewer One shot functionContinuous play/ON-OFF VolumeExit motion streaming mode Seek BarSelect a movie file and click Click again Shutter functionPointer function Functions used with each projection methodPointer When using LB20NT/LB30NT Area Click the desired tab to be set Click OK Setting optionsSetting option window Click on LauncherKey setting Setting optionsVersion information Launcher size settingAutomatic connection setting OtherPress the Menu button on the projector Network setting of the projectorDisplaying the Wireless Menu Select Wireless with the buttonsChanging the network number Network setting of the projectorChanging the projector name Select Input Password at the wireless menu Password settingReturning to the Initial Settings Verifying settingsSelect OK with the buttons and press the Enter button How to display IP address setting menu User settingsIP address settings Press NETWORK→USER1-USER3→ENTER on wireless menuMode Return Cancel Default settings of USER1-USER3 Before using the WEB control Using WebBrowserProxy server settings Using WebBrowserOpen Internet Properties window Enabling JavaScript Basic control window appears. Next Accessing from the Web browserBasic control window Option control window Projector control windowMonitor information window Password changing windowClick Status Making the above settings effective Network setting windowClick Network setting on the menu and click Next Set detail network settingsWireless Manager ME Software UninstallGlossary Advanced GlossaryOpen System Shared KeyTo display Device Manager Frequently Asked QuestionsTo verify whether your system has Network Bridge Frequently Asked QuestionsHow to change settings in Network Bridge How to delete the network bridgeHow to disable the firewall in Windows XP Wireless connection is lost shortly Network setting errorConnection cannot be established with IEEE802.11 g Connection has been lost in the multi live modeTransfer rate is slow Some contents in movies are not displayed Changing the display style Screen saver is not displayed properly in live modeMaking a wireless connection while using the internet Remote control window does not appearFor Technical Support Trademarks