Frequently Asked Questions (cont.)
No wireless connection can be made between my projector and my computer. (cont.)
<When another firewall has been detected>
Are any
If any applications which contain firewalls are installed, the installation may hang up at the [Projector search in progress] display (some firewalls function even when not started).
If this occurs, firewall settings must be changed in order to allow connection to the wireless network. See the User’s Manuals for all applications containing firewalls to perform these settings.
<When the user does not have the administrator authority> Have you logged in as the Administrator?
If you have logged onto a computer as a [GUEST] or a restricted user who does not have administrator authority, you can not perform easy wireless set up (Network No. [1] – [4]). If you must perform easy wireless set up without administrator authority, designate [U] as the network number.
See page 49 or 51 for instructions in how to set [U] as the network number.
<Network setting error>
When connecting with Network number [U], make sure whether wireless menu setting of the projector is correct or not. (See page 49)
Wireless connection is lost shortly.
①The wireless LAN utility used by the computer may have changed the wireless
settings. Close the utility, and then make the connection again using easy wireless set up connection.
②Connection may be broken receiving influence from wireless environment
around.
③When connection is broken,
When live is cancelled with
66