Panasonic PT-LB50NTE Screen multi style, Display the status when no index window is displayed

Page 27
The window shown to the right appears.

Various projection methods (cont.)

4-screen multi style

Connect up to four computers to one projector, and then divide the projector screen into four parts, and simultaneously display the screens for the four computers on the projector screen.

1Press the [MULTI-LIVE SELECT] button on the remote control to turn the projection screen into a full screen

display (the status when no index window is displayed).

If you press the [MULTI-LIVE SELECT] button once or twice when index windows are displayed on the projection screen, the screen will switch over to a full screen display.

2Check the status indication on the launcher to make sure that transmission is possible (check that the green lamp is lit).

3Click [] on the launcher.

4

Select and click the projection position.

The computer image is transmitted to the selected quarter

 

of the projection screen.

Switching to a different position

Select and click a different projection position in step 4 above.

Enlarged display

If [ ] is clicked with a computer, projector screens temporarily change to full screen display. To return to the original display, click [ ] with the computer that click [ ] and select original projection positions with each computer.

Quitting 4-screen multi style

Select and click the checked position in step 4 above.

In the 4-screen multi style, the computer screens from all the computers connected to the projector can be transmitted to the projector. (If an image from another computer has been sent to the image position where an image is already displayed, the existing image is replaced by the new image.)

If the connection error occurs during projection, the message ‘Stop “Live mode”’ will appear, then restart projection by clicking launcher buttons.

• Picture quality or other options can be set on the “Option” window by clicking [ ] on the launcher.

27

Image 27
Contents Wireless Function Edition Contents Wireless Function Edition Contents Wireless Function Edition Do not use near other wireless equipment Channels that can be used Using the projector outside the countryWireless Transmission Project with various methods Live mode SeeMulti live mode Useful functions Project with multiple projectorsNecessary environment for computers to be connected Check your computerSystem requirements Software InstallationContents on Provided CD-ROM Software InstallationClick Next Click Finish when the window to the right appearsDirectX 9.0c Click DirectX 9.0c onIf you chose B in , follow steps Click Installation Free Set UpInsert provided CD-ROM into the CD-ROM drive Select the destination to save, and click OKSelect Access Port window How to connectConnect Select the desired projectors, and click OK Easy Wireless Set UpConnect Turn on the computer Click on the desktopConnect When another firewall has been detected See Connection error messagesWhen the Network Bridge setting has been detected See When Windows Firewall has been detected SeeConnect without easy wireless set up When logging on without administrator authority② Computer settings Click Start→Log Off and log off from the computer Select the desired projector, and click OK③ Computer operation Connecting through the access point ① Projector settingsTurn on the computer Adding and deleting connections Operations when password entry is required for connectionClick Designate at the Select Access Port Window Other operations for connectionSearching by projector’s ID Canceling the connection Click on the launcherClick Yes Simple launcher Full launcher Place in notification area Various projection methodsDescription of the launcher Status indicationProjection mode select buttons Various projection methodsFunction buttons Quitting live mode Live modeMulti live mode Switching from one style to anotherHow to switch styles Enlarged display Display the status when no index window is displayedSwitching to a different position Screen multi styleScreen index style Quitting 4-screen index style Toggle between These with Enter button Quitting 16-screen index styleClick of the launcher Multiple Source Live ModeQuitting multiple source live mode Multiple Source Multi Live Mode Button on the remote controlPress the MULTI-LIVE Select Secondary viewer function Quitting multiple source multi live modeUseful Functions Selective area transmissionQuitting selective area transmission Useful Functions Secondary display transmissionQuitting secondary display transmission Secondary viewer One shot functionContinuous play/ON-OFF VolumeExit motion streaming mode Seek BarSelect a movie file and click Click again Shutter functionPointer function Functions used with each projection methodPointer When using LB20NT/LB30NT Area Click the desired tab to be set Click OK Setting optionsSetting option window Click on LauncherKey setting Setting optionsVersion information Launcher size settingAutomatic connection setting OtherPress the Menu button on the projector Network setting of the projectorDisplaying the Wireless Menu Select Wireless with the buttonsNetwork setting of the projector Changing the network numberChanging the projector name Select Input Password at the wireless menu Password settingVerifying settings Returning to the Initial SettingsSelect OK with the buttons and press the Enter button How to display IP address setting menu User settingsIP address settings Press NETWORK→USER1-USER3→ENTER on wireless menuMode Return Cancel Default settings of USER1-USER3 Before using the WEB control Using WebBrowserUsing WebBrowser Proxy server settingsOpen Internet Properties window Enabling JavaScript Basic control window appears. Next Accessing from the Web browserBasic control window Option control window Projector control windowPassword changing window Monitor information windowClick Status Making the above settings effective Network setting windowClick Network setting on the menu and click Next Set detail network settingsWireless Manager ME Software UninstallGlossary Advanced GlossaryOpen System Shared KeyTo display Device Manager Frequently Asked QuestionsTo verify whether your system has Network Bridge Frequently Asked QuestionsHow to change settings in Network Bridge How to delete the network bridgeHow to disable the firewall in Windows XP Wireless connection is lost shortly Network setting errorConnection has been lost in the multi live mode Connection cannot be established with IEEE802.11 gTransfer rate is slow Some contents in movies are not displayed Changing the display style Screen saver is not displayed properly in live modeMaking a wireless connection while using the internet Remote control window does not appearFor Technical Support Trademarks