Panasonic PT-LB50NTE manual Connect without easy wireless set up, ② Computer settings

Page 17

Set the details of network and select [OK].

As for network setting items, see pages 49-52.

Confirm to your system administrator before changing any settings. <Example>

Connect (cont.)

Connect without easy wireless set up

When logging on without administrator authority

Before starting Wireless Manager ME3.0, it is necessary to carry out “Computer settings” (② on this page) under the administrator authority in advance.

Next, logon as a restricted user or [GUEST], and start Wireless Manager ME 3.0. Confirm to your system administrator before changing any settings.

Following settings are examples of when using a default setting projector.

①Projector settings ※“Glossary” (See pages 61-62)

1 Turn on the projector and press the [WIRELESS] button on the remote control.

2Select [USER 1]- [USER 3] from [NETWORK] at the wireless menu and press the [ENTER] button.

3

	DHCP※	OFF
	IP ADDRESS※	192.168.10.100
	SUBNETMASK※	255.255.255.0
	SSID※	Panasonic Projector
	MODE	AD HOC※
	AUTHENTICATION	OPEN※ (Some computers may require connection by [SHARED※] authentication.)
	ENCRYPTION	NONE…When not performing encryption
	ENCRYPTION	WEP…When performing encryption
		WEP…When performing encryption
	ENCRYPTION KEY	When [ENCRYPTION] setting is [WEP※]:
	SETTING	DEFAULT KEY : Set 1 – 4 numerals for the default key.
		KEY 1 – 4	: Set these to match the WEP key registered
			in [DEFAULT KEY].

② Computer settings

4 Turn on the computer and log on with the administrator authority.

Click [Start] → [Control Panel] → [Network and Internet Connections] → [Network Connections], right click [Wireless Network Connections], and click [Properties], then [Wireless Network Connection Properties] window appears.

5Select [Internet Protocol (TCP/IP※)] on [General] tab, and click [Properties].

[Internet Protocol (TCP/IP) Properties] window appears.

17

Image 17

Contents Wireless Function Edition Contents Wireless Function Edition Contents Wireless Function Edition Do not use near other wireless equipment Channels that can be used Using the projector outside the countryMulti live mode Wireless TransmissionProject with various methods Live mode See Useful functions Project with multiple projectorsNecessary environment for computers to be connected Check your computerSystem requirements Software InstallationContents on Provided CD-ROM Software InstallationDirectX 9.0c Click Finish when the window to the right appearsClick DirectX 9.0c on Click NextInsert provided CD-ROM into the CD-ROM drive Click Installation Free Set UpSelect the destination to save, and click OK If you chose B in , follow stepsConnect Select Access Port windowHow to connect Connect Easy Wireless Set UpTurn on the computer Click on the desktop Select the desired projectors, and click OKConnect When the Network Bridge setting has been detected See Connection error messagesWhen Windows Firewall has been detected See When another firewall has been detected See② Computer settings Connect without easy wireless set upWhen logging on without administrator authority ③ Computer operation Click Start→Log Off and log off from the computerSelect the desired projector, and click OK Turn on the computer Connecting through the access point① Projector settings Click Designate at the Select Access Port Window Operations when password entry is required for connectionOther operations for connection Adding and deleting connectionsSearching by projector’s ID Click Yes Canceling the connectionClick on the launcher Description of the launcher Various projection methodsStatus indication Simple launcher Full launcher Place in notification areaFunction buttons Projection mode select buttonsVarious projection methods Quitting live mode Live modeHow to switch styles Multi live modeSwitching from one style to another Switching to a different position Display the status when no index window is displayedScreen multi style Enlarged displayScreen index style Quitting 4-screen index style Toggle between These with Enter button Quitting 16-screen index styleClick of the launcher Multiple Source Live ModeQuitting multiple source live mode Press the MULTI-LIVE Select Multiple Source Multi Live ModeButton on the remote control Secondary viewer function Quitting multiple source multi live modeQuitting selective area transmission Useful FunctionsSelective area transmission Quitting secondary display transmission Useful FunctionsSecondary display transmission Secondary viewer One shot functionExit motion streaming mode VolumeSeek Bar Continuous play/ON-OFFSelect a movie file and click Pointer function Shutter functionFunctions used with each projection method Click againPointer When using LB20NT/LB30NT Area Setting option window Setting optionsClick on Launcher Click the desired tab to be set Click OKKey setting Setting optionsAutomatic connection setting Launcher size settingOther Version informationDisplaying the Wireless Menu Network setting of the projectorSelect Wireless with the buttons Press the Menu button on the projectorChanging the projector name Network setting of the projectorChanging the network number Select Input Password at the wireless menu Password settingSelect OK with the buttons and press the Enter button Verifying settingsReturning to the Initial Settings IP address settings User settingsPress NETWORK→USER1-USER3→ENTER on wireless menu How to display IP address setting menuMode Return Cancel Default settings of USER1-USER3 Before using the WEB control Using WebBrowserOpen Internet Properties window Using WebBrowserProxy server settings Enabling JavaScript Basic control window appears. Next Accessing from the Web browserBasic control window Option control window Projector control windowClick Status Password changing windowMonitor information window Click Network setting on the menu and click Next Network setting windowSet detail network settings Making the above settings effectiveWireless Manager ME Software UninstallGlossary Open System GlossaryShared Key AdvancedTo display Device Manager Frequently Asked QuestionsHow to change settings in Network Bridge Frequently Asked QuestionsHow to delete the network bridge To verify whether your system has Network BridgeHow to disable the firewall in Windows XP Wireless connection is lost shortly Network setting errorTransfer rate is slow Connection has been lost in the multi live modeConnection cannot be established with IEEE802.11 g Some contents in movies are not displayed Making a wireless connection while using the internet Screen saver is not displayed properly in live modeRemote control window does not appear Changing the display styleFor Technical Support Trademarks