Panasonic PT-F300NTE, PT-F300E manual Switching the projector on/off, Mains lead, Connecting

Page 23

Switching the projector on/off

Mains lead

Connecting

Disconnecting

1.Make sure the shape of the mains plug and the AC IN terminal on the back of the projector match, then push the plug all the way in.

1.Unplug the mains lead from the mains socket.

2.Depress the latch and slide the cover off.

2.Align the side of the power cord secure lock with the side guide rail of the AC IN terminal of the projector and slide it in.

Rail guide

3.Place the latch to the latch catcher and press until it clicks.

Latch

4. Connect the mains lead to a mains socket.

Latch

3.Slide the power cord secure lock up along the side guide rail and remove.

Rail guide

4.Hold the plug and unplug the mains lead from the AC IN terminal on the back of the projector.

Power indicator lights in orange if the internal cooling fan is still operating by internal power supply.

Basic Operation

NOTE:

•Do not use other than the provided mains lead.

•Ensure all the input devices are connected and turned off before connecting the mains lead.

•Do not force the connector as this may damage the projector and/or the mains lead.

•Dirt or dust build-up around plugs may cause fire or electrical hazards.

•Switch off the power to the projector when not in use.

•If the projector is switched on again while the internal cooling fan is still operating by the internal power supply, it may take a while to start the projection.

Direct power on function

You can start the projection with only supplying the electric power. See “INITIAL START UP” on page 43.

Direct power off function

You can switch off the electric power supply any time by unplugging the mains plug from the mains socket or by switching off the main power. The internal lamp cooling fan keeps operating by the internal power supply, and stops automatically when cooled enough.

ENGLISH - 23

Page 22 Page 24
Image 23
Page 22 Page 24
Contents PT-F300E To rain or moisture Important Safety NoticeFor business users in the European Union Important Safety NoticeDeclaration of Conformity DoC Declaration of ConformityEnglish Contents Appendix SettingsMaintenance ContentsPrecautions with regard to safety Do not look into the lens while the projector is being used Precautions with regard to safetyDo not set up the projector outdoors Do not mix old and new batteries Remove the used batteries from the remote control promptlyDo not put your weight on this projector Use only the specified batteriesOptical components SecurityOrder to get the best picture quality Liquid crystal panelMains lead AccessoriesPower cord secure lock Read this first Minimum required setting screenControl panel About Your ProjectorProjector body Top and front viewLamp unit compartment Air exhaust port Auto cleaning filter ACF Front leg Adjusters CompartmentAbout Your Projector Back and bottom view Security lockBattery compartment Remote controlAttaching a hand strap Top view Remote control indicator CLOCK, Clock Phase and Signal Search forCalculation methods Setting upScreen size and throw distance Mounting on the ceiling and projecting from front Front leg adjusters and throwing angleSetting up Projection methodVertical shift Adjusting the lens shift leverLens shift and positioning Horizontal shiftWhen the projector position is fixed Setting up Projector location rangeWhen the screen position is fixed LAN terminal Connecting example ComputersConnections Before connection to the projectorConnections Connecting example AV equipmentConnecting with Video IN/S-VIDEO Connecting with DVI-DDirect power off function Switching the projector on/offConnecting Direct power on functionPower indicator informs you the status of the power Power indicatorSwitching the projector on/off Switch off the Main Power on the back of the projector Switching on the projectorSwitching off the projector Switch the Main Power on Press the power buttonPositioning the image Selecting the input signalProjecting an image Facing to the projector Remote control operationSetting up the image position automatically Operating rangeEnlarging the centred area Switching the input signalStopping the projection Resetting to the factory default settingsProjecting an image in INDEX-WINDOW mode Capturing an imageLaser pointer beam emitter Shown as PT-F300NTE Using an assigned functionUsing the laser pointer Disable the Laser buttonControlling the volume of the speaker Main menu and Sub-menu DefaultMenu Navigation Menu Navigation Filter Counter ResetVolume Default Balance Default See CD-ROM contents for more detailed informationDisplaying the Main menu Adjusting with the bar scale itemsOperating procedure Navigating through the menuPicture menu TV-SYSTEM Color TemperatureDaylight View Digital Cinema RealityPosition menu 169 AspectPosition menu Aspect ratio optionsFrame Lock ON-SCREEN Display Display Option menuDVI-D Sxga Mode Auto SetupSignal Search Wide ModeMenu items Refer Other FunctionsCOMPUTER2 Select Projector Setup menuNo Signal SHUT-OFF StatusEmulate InstallationHigh Altitude Mode Audio SettingRemaining Filter of Status in Projector Filter Counter ResetTest Pattern Initialize ALLText Display PasswordPassword Change Security menuSecurity menu Menu Lock PasswordControl Device Setup Menu LockNetwork menu, the following items are available Wireless LAN PT-F300NTEonlyNetwork menu Items in Network menuTemp indicator TEMP, Lamp and Filter IndicatorsManaging the indicated problems Lamp indicatorReplacing the Lamp unit Care and ReplacementCleaning the projector Before replacing the ACF Replacing the Auto Cleaning Filter ACFCare and Replacement Replacement procedure When to replace the ACFOn a soft cloth Resetting the RemainingCounter Reset in Projector Setup Turn the projector upside down and place it gentlyTroubleshooting KHz MHz List of compatible signalsTechnical Information Quality*2Serial terminal Projector Technical Information Cable specificationsControl commands Computer connection guidanceRemote terminal Lamp switchingSwitching input Signals Input signalDVI-D in terminal Ceiling mount bracket safeguardsInstalling the safety cable Screen size and throw distance for 169 aspect ratio Specifications Weight Wireless LAN CompatibleWireless channel DimensionsUnit mm DimensionsTrademark acknowledgements Index Aspect Audio Audio SettingIndex Picture Mode

PT-F300NTE, PT-F300E specifications

The Panasonic PT-F300E and PT-F300NTE are advanced projectors that deliver exceptional performance and versatility for various applications, from educational environments to corporate settings. Both models incorporate cutting-edge technologies and design features that make them stand out in the competitive projector market.

One of the primary features of the PT-F300E and PT-F300NTE is their impressive brightness levels, achieving up to 3000 ANSI lumens. This high brightness makes them suitable for use in well-lit rooms, ensuring that presentations remain clear and vibrant without the need for dimming the lights. Furthermore, the projectors utilize a high-quality LCD panel that enhances color reproduction and overall image quality, delivering bright, vivid images that captivate audiences.

In terms of resolution, both models support native XGA (1024 x 768) resolution, making them ideal for displaying standard-definition content. The projectors incorporate DLP technology, which helps in producing sharp images with excellent contrast ratios. This is particularly beneficial for detailed visuals, such as graphs and charts, ensuring that every element is easily visible to viewers.

Connectivity features are versatile and user-friendly, with multiple input options including HDMI, VGA, and component video. This wide range of connectivity allows users to easily connect laptops, cameras, and other devices, making it convenient for various setup scenarios. Additionally, the projectors support network capabilities, enabling remote monitoring and control, which is especially useful for institutions with multiple units deployed across locations.

Another significant characteristic of the PT-F300E and PT-F300NTE is their low maintenance requirements. The projectors are designed with long-lasting components, including a lamp life that lasts up to 6,000 hours in economy mode. This longevity reduces the need for frequent replacements, lowering running costs and making them more economical over time.

Furthermore, these projectors feature advanced cooling technology to minimize noise levels, ensuring a quieter operation that doesn't distract from the presentation content. This is particularly important in classroom environments where concentration is key.

In conclusion, the Panasonic PT-F300E and PT-F300NTE projectors combine brightness, high-resolution imaging, versatile connectivity, and low maintenance, making them an excellent choice for a wide range of applications. Their robust features and reliable performance make them a trusted option for educators and professionals alike, ensuring that they can deliver impactful presentations with ease.
Top Page Image Contents