Panasonic PT-F300E, PT-F300NTE manual Power indicator, Switching the projector on/off

Page 24

Switching the projector on/off

Power indicator

The power indicator informs you the status of the power.

When the LAMP or TEMP indicator is flashing, you cannot switch on the power. See “TEMP, LAMP and FILTER Indicators” on page 49.

Power indicator

Basic Operation

	Indicator status		Status

	No illumination or flashing		The MAIN POWER is switched off.

		Lit	The MAIN POWER is switched on and the projector is in standby mode.
		Lit	When the LAMP or TEMP indicator is flashing, not available to switch on the power.

	RED
	RED		The power is switched off. (When NETWORK STANDBY in NETWORK menu or IN
		Flashing	STANDBY MODE of AUDIO SETTING in PROJECTOR SETUP menu is set to ON). Press
			the power button to start the projection.

	GREEN	Flashing	The power is switched on and the projector is getting ready to project.

		Lit	Projecting.
		Lit	Projecting.

		Lit	The power is switched off and the projector is cooling the lamp. The indicator will light or flash,
	ORANGE	Lit	and start the projection after a short time.
			and start the projection after a short time.

		Flashing	The power is switched on again when cooling the lamp and recovering to projection mode.

NOTE:

•If the projector is switched on again while the internal cooling fan is still operating by the internal power supply, it may take a while to start the projection.

•The electric consumption in standby mode is 4 W.

ENGLISH - 24

Image 24

Contents PT-F300E Important Safety Notice To rain or moistureImportant Safety Notice For business users in the European UnionDeclaration of Conformity Declaration of Conformity DoCEnglish Contents Settings MaintenanceContents AppendixPrecautions with regard to safety Precautions with regard to safety Do not set up the projector outdoorsDo not look into the lens while the projector is being used Remove the used batteries from the remote control promptly Do not put your weight on this projectorUse only the specified batteries Do not mix old and new batteriesSecurity Order to get the best picture qualityLiquid crystal panel Optical componentsAccessories Power cord secure lockMains lead Minimum required setting screen Read this firstAbout Your Projector Projector bodyTop and front view Control panelAuto cleaning filter ACF Front leg Adjusters Compartment About Your Projector Back and bottom viewSecurity lock Lamp unit compartment Air exhaust portRemote control Attaching a hand strap Top view Remote control indicatorCLOCK, Clock Phase and Signal Search for Battery compartmentSetting up Screen size and throw distanceCalculation methods Front leg adjusters and throwing angle Setting upProjection method Mounting on the ceiling and projecting from frontAdjusting the lens shift lever Lens shift and positioningHorizontal shift Vertical shiftSetting up Projector location range When the screen position is fixedWhen the projector position is fixed Connecting example Computers Connections Before connection to the projector LAN terminalConnecting example AV equipment Connecting with Video IN/S-VIDEOConnecting with DVI-D ConnectionsSwitching the projector on/off ConnectingDirect power on function Direct power off functionPower indicator Switching the projector on/offPower indicator informs you the status of the power Switching on the projector Switching off the projectorSwitch the Main Power on Press the power button Switch off the Main Power on the back of the projectorSelecting the input signal Projecting an imagePositioning the image Remote control operation Setting up the image position automaticallyOperating range Facing to the projectorSwitching the input signal Enlarging the centred areaResetting to the factory default settings Projecting an image in INDEX-WINDOW modeCapturing an image Stopping the projectionUsing an assigned function Using the laser pointerDisable the Laser button Laser pointer beam emitter Shown as PT-F300NTEControlling the volume of the speaker Default Menu NavigationMain menu and Sub-menu Filter Counter Reset Volume Default Balance DefaultSee CD-ROM contents for more detailed information Menu NavigationAdjusting with the bar scale items Operating procedureNavigating through the menu Displaying the Main menuPicture menu Color Temperature Daylight ViewDigital Cinema Reality TV-SYSTEMPosition menu Aspect Position menuAspect ratio options 169Frame Lock Display Option menu DVI-DON-SCREEN Display Auto Setup Signal SearchWide Mode Sxga ModeOther Functions Menu items ReferProjector Setup menu No Signal SHUT-OFFStatus COMPUTER2 SelectInstallation High Altitude ModeAudio Setting EmulateFilter Counter Reset Test PatternInitialize ALL Remaining Filter of Status in ProjectorPassword Password ChangeSecurity menu Text DisplayMenu Lock Password Control Device SetupMenu Lock Security menuWireless LAN PT-F300NTEonly Network menuItems in Network menu Network menu, the following items are availableTEMP, Lamp and Filter Indicators Managing the indicated problemsLamp indicator Temp indicatorCare and Replacement Cleaning the projectorReplacing the Lamp unit Replacing the Auto Cleaning Filter ACF Care and Replacement Replacement procedureWhen to replace the ACF Before replacing the ACFResetting the Remaining Counter Reset in Projector SetupTurn the projector upside down and place it gently On a soft clothTroubleshooting List of compatible signals Technical InformationQuality*2 KHz MHzSerial terminal Technical Information Cable specifications Control commandsComputer connection guidance ProjectorLamp switching Switching input SignalsInput signal Remote terminalCeiling mount bracket safeguards Installing the safety cableDVI-D in terminal Screen size and throw distance for 169 aspect ratio Specifications Wireless LAN Compatible Wireless channelDimensions WeightDimensions Trademark acknowledgementsUnit mm Aspect Audio Audio Setting IndexPicture Mode Index