Panasonic PT-F300NTE Startup Logo, Auto Setup, Signal Search, Back Color, Wide Mode, Sxga Mode

Page 41

DISPLAY OPTION menu

STARTUP LOGO

You can switch the logo on/off that is displayed when starting up the projector. Press I H to select the required option. STARTUP LOGO will be displayed for 30 seconds.

ON

Active

OFF

Deactive

USER

Display the original text

Editing the original text

If you select USER, you can display the 2 lines of original text up to 40 characters in 1 line instead of the logo.

TEXT CHANGE

 

ALL DELETE

OK

CANCEL

AUTO SETUP

You can turn off the AUTO SETUP button function for when the COMPUTER signal is detected.

AUTO

When the projector detects a

 

COMPUTER or DVI signal, adjust

 

the projected image position

 

automatically for SHIFT, SIGNAL

 

SEARCH, DOT CLOCK and CLOCK

 

PHASE.

BUTTON

Only when the AUTO SETUP button

 

is pressed, the projected image

 

position will be adjusted for DOT

 

CLOCK and CLOCK PHASE. See

 

“Remote control” on page 16.

NOTE:

• Usually the recommended setting is AUTO.

SIGNAL SEARCH

You can turn off the auto signal detecting system.

ON

Detect the input signal from the

 

terminals and project the image.

OFF

Deactive

1.Select USER and press ENTER.

2.Select the required line to enter or edit the original text, and press the ENTER button.

3.Enter the characters and repeat until finish the line.

Use F G I H to specify the location of the required character, and press the ENTER button.

Move the cursor to ALL DELETE and press the ENTER button to delete all the entered text line. Press the DEFAULT button to delete the last entered character or indicated with the cursor in the text line. To insert a character in the entered text line, move the cursor to the text box to select the required place and press G to select a character.

4.Select OK and press the ENTER button to set the entered text in a box.

Press G and edit the TEXT2 if you need to, and repeat the step 3.

NOTE:

•SIGNAL SEARCH is not available when any input signal is projecting.

•Usually the recommended setting is ON.

BACK COLOR

You can choose a BLUE or BLACK screen for when the projector is idle. Press I H to select the required option.

WIDE MODE

When projecting WIDE signals, switch to ON to display the image in well adjusted size.

AUTO

Automatic detective system

OFF

For 4:3 signals

ON

For WIDE signals

 

(16:9, 16:10 and 15:9)

Settings

SXGA MODE

You can switch the projection mode between SXGA+ and SXGA for SXGA signals. Press I H to select the required option.

SXGA

Smaller setting

SXGA+

Larger setting

ENGLISH - 41

Page 40 Page 42
Image 41
Page 40 Page 42
Contents PT-F300E To rain or moisture Important Safety NoticeFor business users in the European Union Important Safety NoticeDeclaration of Conformity DoC Declaration of ConformityEnglish Contents Maintenance SettingsContents AppendixPrecautions with regard to safety Do not look into the lens while the projector is being used Precautions with regard to safetyDo not set up the projector outdoors Do not put your weight on this projector Remove the used batteries from the remote control promptlyUse only the specified batteries Do not mix old and new batteriesOrder to get the best picture quality SecurityLiquid crystal panel Optical componentsMains lead AccessoriesPower cord secure lock Read this first Minimum required setting screenProjector body About Your ProjectorTop and front view Control panelAbout Your Projector Back and bottom view Auto cleaning filter ACF Front leg Adjusters CompartmentSecurity lock Lamp unit compartment Air exhaust portAttaching a hand strap Top view Remote control indicator Remote controlCLOCK, Clock Phase and Signal Search for Battery compartmentCalculation methods Setting upScreen size and throw distance Setting up Front leg adjusters and throwing angleProjection method Mounting on the ceiling and projecting from frontLens shift and positioning Adjusting the lens shift leverHorizontal shift Vertical shiftWhen the projector position is fixed Setting up Projector location rangeWhen the screen position is fixed Connections Connecting example ComputersBefore connection to the projector LAN terminalConnecting with Video IN/S-VIDEO Connecting example AV equipmentConnecting with DVI-D ConnectionsConnecting Switching the projector on/offDirect power on function Direct power off functionPower indicator informs you the status of the power Power indicatorSwitching the projector on/off Switching off the projector Switching on the projectorSwitch the Main Power on Press the power button Switch off the Main Power on the back of the projectorPositioning the image Selecting the input signalProjecting an image Setting up the image position automatically Remote control operationOperating range Facing to the projectorEnlarging the centred area Switching the input signalProjecting an image in INDEX-WINDOW mode Resetting to the factory default settingsCapturing an image Stopping the projectionUsing the laser pointer Using an assigned functionDisable the Laser button Laser pointer beam emitter Shown as PT-F300NTEControlling the volume of the speaker Main menu and Sub-menu DefaultMenu Navigation Volume Default Balance Default Filter Counter ResetSee CD-ROM contents for more detailed information Menu NavigationOperating procedure Adjusting with the bar scale itemsNavigating through the menu Displaying the Main menuPicture menu Daylight View Color TemperatureDigital Cinema Reality TV-SYSTEMPosition menu Position menu AspectAspect ratio options 169Frame Lock ON-SCREEN Display Display Option menuDVI-D Signal Search Auto SetupWide Mode Sxga ModeMenu items Refer Other FunctionsNo Signal SHUT-OFF Projector Setup menuStatus COMPUTER2 SelectHigh Altitude Mode InstallationAudio Setting EmulateTest Pattern Filter Counter ResetInitialize ALL Remaining Filter of Status in ProjectorPassword Change PasswordSecurity menu Text DisplayControl Device Setup Menu Lock PasswordMenu Lock Security menuNetwork menu Wireless LAN PT-F300NTEonlyItems in Network menu Network menu, the following items are availableManaging the indicated problems TEMP, Lamp and Filter IndicatorsLamp indicator Temp indicatorReplacing the Lamp unit Care and ReplacementCleaning the projector Care and Replacement Replacement procedure Replacing the Auto Cleaning Filter ACFWhen to replace the ACF Before replacing the ACFCounter Reset in Projector Setup Resetting the RemainingTurn the projector upside down and place it gently On a soft clothTroubleshooting Technical Information List of compatible signalsQuality*2 KHz MHzSerial terminal Control commands Technical Information Cable specificationsComputer connection guidance ProjectorSwitching input Signals Lamp switchingInput signal Remote terminalDVI-D in terminal Ceiling mount bracket safeguardsInstalling the safety cable Screen size and throw distance for 169 aspect ratio Specifications Wireless channel Wireless LAN CompatibleDimensions WeightUnit mm DimensionsTrademark acknowledgements Index Aspect Audio Audio SettingIndex Picture Mode

PT-F300NTE, PT-F300E specifications

The Panasonic PT-F300E and PT-F300NTE are advanced projectors that deliver exceptional performance and versatility for various applications, from educational environments to corporate settings. Both models incorporate cutting-edge technologies and design features that make them stand out in the competitive projector market.

One of the primary features of the PT-F300E and PT-F300NTE is their impressive brightness levels, achieving up to 3000 ANSI lumens. This high brightness makes them suitable for use in well-lit rooms, ensuring that presentations remain clear and vibrant without the need for dimming the lights. Furthermore, the projectors utilize a high-quality LCD panel that enhances color reproduction and overall image quality, delivering bright, vivid images that captivate audiences.

In terms of resolution, both models support native XGA (1024 x 768) resolution, making them ideal for displaying standard-definition content. The projectors incorporate DLP technology, which helps in producing sharp images with excellent contrast ratios. This is particularly beneficial for detailed visuals, such as graphs and charts, ensuring that every element is easily visible to viewers.

Connectivity features are versatile and user-friendly, with multiple input options including HDMI, VGA, and component video. This wide range of connectivity allows users to easily connect laptops, cameras, and other devices, making it convenient for various setup scenarios. Additionally, the projectors support network capabilities, enabling remote monitoring and control, which is especially useful for institutions with multiple units deployed across locations.

Another significant characteristic of the PT-F300E and PT-F300NTE is their low maintenance requirements. The projectors are designed with long-lasting components, including a lamp life that lasts up to 6,000 hours in economy mode. This longevity reduces the need for frequent replacements, lowering running costs and making them more economical over time.

Furthermore, these projectors feature advanced cooling technology to minimize noise levels, ensuring a quieter operation that doesn't distract from the presentation content. This is particularly important in classroom environments where concentration is key.

In conclusion, the Panasonic PT-F300E and PT-F300NTE projectors combine brightness, high-resolution imaging, versatile connectivity, and low maintenance, making them an excellent choice for a wide range of applications. Their robust features and reliable performance make them a trusted option for educators and professionals alike, ensuring that they can deliver impactful presentations with ease.
Top Page Image Contents