Panasonic PT-F300E Resetting the Remaining, Turn the projector upside down and place it gently

Page 52

Care and Replacement

Replacement procedure

1.

Turn the projector upside down and place it gently

 

Resetting the REMAINING

 

on a soft cloth.

 

FILTER

2.

Use a Phillips-head screwdriver to loosen 3 ACF

 

 

cover fixing screws until the screws turn freely and

1.

Turn on the projector and display the FILTER

 

remove the ACF cover.

 

COUNTER RESET in PROJECTOR SETUP.

 

 

2.

Press the ENTER button for more than 3 seconds.

 

 

 

The confirmation screen will be displayed.

ACF cover fixing screw

3.Select OK by pressing I, then press the ENTER button.

4.Display the STATUS and confirm the figure.

Soft cloth

ACF cover

FILTER COUNTER RESET

RESET FILTER COUNTER?

3.Release the lock by pushing in the lock clamp to inside, and slide out the ACF unit from the projector slowly.

4.Insert the new ACF unit into the compartment in correct direction and slightly push down until it clicks. Tighten an ACF fixing screw securely with a Phillips-head screwdriver.

5.Attach the ACF cover and tighten the ACF cover fixing screws securely with a Phillips-head screwdriver.

Push in

ACF

OK

CANCEL

 

RETURN

SELECT

 

 

ENTER

Maintenance

Push in

Clamp

 

NOTE:

•If the ACF and/or ACF cover are attached incorrectly, the projector may not be turned on.

•Do not switch the power on while the ACF cover removed.

•When you replace the ACF unit, clean the compartment and/or the air exhaust port if you need to.

•The replacement timing of the ACF is 36 000 hours of use at maximum and it depends on environment of usage.

ENGLISH - 52

Page 51 Page 53
Image 52
Page 51 Page 53
Contents PT-F300E Important Safety Notice To rain or moistureImportant Safety Notice For business users in the European UnionDeclaration of Conformity Declaration of Conformity DoCEnglish Contents Settings MaintenanceContents AppendixPrecautions with regard to safety Do not set up the projector outdoors Precautions with regard to safetyDo not look into the lens while the projector is being used Remove the used batteries from the remote control promptly Do not put your weight on this projectorUse only the specified batteries Do not mix old and new batteriesSecurity Order to get the best picture qualityLiquid crystal panel Optical componentsPower cord secure lock AccessoriesMains lead Minimum required setting screen Read this firstAbout Your Projector Projector bodyTop and front view Control panelAuto cleaning filter ACF Front leg Adjusters Compartment About Your Projector Back and bottom viewSecurity lock Lamp unit compartment Air exhaust portRemote control Attaching a hand strap Top view Remote control indicatorCLOCK, Clock Phase and Signal Search for Battery compartmentScreen size and throw distance Setting upCalculation methods Front leg adjusters and throwing angle Setting upProjection method Mounting on the ceiling and projecting from frontAdjusting the lens shift lever Lens shift and positioningHorizontal shift Vertical shiftWhen the screen position is fixed Setting up Projector location rangeWhen the projector position is fixed Connecting example Computers ConnectionsBefore connection to the projector LAN terminalConnecting example AV equipment Connecting with Video IN/S-VIDEOConnecting with DVI-D ConnectionsSwitching the projector on/off ConnectingDirect power on function Direct power off functionSwitching the projector on/off Power indicatorPower indicator informs you the status of the power Switching on the projector Switching off the projectorSwitch the Main Power on Press the power button Switch off the Main Power on the back of the projectorProjecting an image Selecting the input signalPositioning the image Remote control operation Setting up the image position automaticallyOperating range Facing to the projectorSwitching the input signal Enlarging the centred areaResetting to the factory default settings Projecting an image in INDEX-WINDOW modeCapturing an image Stopping the projectionUsing an assigned function Using the laser pointerDisable the Laser button Laser pointer beam emitter Shown as PT-F300NTEControlling the volume of the speaker Menu Navigation DefaultMain menu and Sub-menu Filter Counter Reset Volume Default Balance DefaultSee CD-ROM contents for more detailed information Menu NavigationAdjusting with the bar scale items Operating procedureNavigating through the menu Displaying the Main menuPicture menu Color Temperature Daylight ViewDigital Cinema Reality TV-SYSTEMPosition menu Aspect Position menuAspect ratio options 169Frame Lock DVI-D Display Option menuON-SCREEN Display Auto Setup Signal SearchWide Mode Sxga ModeOther Functions Menu items ReferProjector Setup menu No Signal SHUT-OFFStatus COMPUTER2 SelectInstallation High Altitude ModeAudio Setting EmulateFilter Counter Reset Test PatternInitialize ALL Remaining Filter of Status in ProjectorPassword Password ChangeSecurity menu Text DisplayMenu Lock Password Control Device SetupMenu Lock Security menuWireless LAN PT-F300NTEonly Network menuItems in Network menu Network menu, the following items are availableTEMP, Lamp and Filter Indicators Managing the indicated problemsLamp indicator Temp indicatorCleaning the projector Care and ReplacementReplacing the Lamp unit Replacing the Auto Cleaning Filter ACF Care and Replacement Replacement procedureWhen to replace the ACF Before replacing the ACFResetting the Remaining Counter Reset in Projector SetupTurn the projector upside down and place it gently On a soft clothTroubleshooting List of compatible signals Technical InformationQuality*2 KHz MHzSerial terminal Technical Information Cable specifications Control commandsComputer connection guidance ProjectorLamp switching Switching input SignalsInput signal Remote terminalInstalling the safety cable Ceiling mount bracket safeguardsDVI-D in terminal Screen size and throw distance for 169 aspect ratio Specifications Wireless LAN Compatible Wireless channelDimensions WeightTrademark acknowledgements DimensionsUnit mm Aspect Audio Audio Setting IndexPicture Mode Index

PT-F300NTE, PT-F300E specifications

The Panasonic PT-F300E and PT-F300NTE are advanced projectors that deliver exceptional performance and versatility for various applications, from educational environments to corporate settings. Both models incorporate cutting-edge technologies and design features that make them stand out in the competitive projector market.

One of the primary features of the PT-F300E and PT-F300NTE is their impressive brightness levels, achieving up to 3000 ANSI lumens. This high brightness makes them suitable for use in well-lit rooms, ensuring that presentations remain clear and vibrant without the need for dimming the lights. Furthermore, the projectors utilize a high-quality LCD panel that enhances color reproduction and overall image quality, delivering bright, vivid images that captivate audiences.

In terms of resolution, both models support native XGA (1024 x 768) resolution, making them ideal for displaying standard-definition content. The projectors incorporate DLP technology, which helps in producing sharp images with excellent contrast ratios. This is particularly beneficial for detailed visuals, such as graphs and charts, ensuring that every element is easily visible to viewers.

Connectivity features are versatile and user-friendly, with multiple input options including HDMI, VGA, and component video. This wide range of connectivity allows users to easily connect laptops, cameras, and other devices, making it convenient for various setup scenarios. Additionally, the projectors support network capabilities, enabling remote monitoring and control, which is especially useful for institutions with multiple units deployed across locations.

Another significant characteristic of the PT-F300E and PT-F300NTE is their low maintenance requirements. The projectors are designed with long-lasting components, including a lamp life that lasts up to 6,000 hours in economy mode. This longevity reduces the need for frequent replacements, lowering running costs and making them more economical over time.

Furthermore, these projectors feature advanced cooling technology to minimize noise levels, ensuring a quieter operation that doesn't distract from the presentation content. This is particularly important in classroom environments where concentration is key.

In conclusion, the Panasonic PT-F300E and PT-F300NTE projectors combine brightness, high-resolution imaging, versatile connectivity, and low maintenance, making them an excellent choice for a wide range of applications. Their robust features and reliable performance make them a trusted option for educators and professionals alike, ensuring that they can deliver impactful presentations with ease.
Top Page Image Contents