Panasonic PT-F300NTE, PT-F300E manual Filter Counter Reset, Test Pattern, Initialize ALL

Page 45

 

PROJECTOR SETUP menu

 

 

 

COMPUTER2

 

 

FILTER COUNTER RESET

 

COM.AUDIO IN 2

 

Output audio that is input to the

After you replaced the Auto Cleaning Filter (ACF),

COMPUTER AUDIO 2.

REMAINING FILTER of STATUS in PROJECTOR

AUDIO IN Output audio that is input to the

SETUP need to be reset to "0".

AUDIO IN.

1. Press the ENTER button for more than 3 seconds.

 

TEST PATTERN

You can use the 7 different test patterns to adjust the focus of the image. See “Lens shift and positioning” on page 19.

1.Press the ENTER button to display the test pattern 1.

2.Press I H to select the required test pattern.

3.Adjust the focus with the focus lever.

4.Press the MENU or RETURN button to return to the previous menu, or press repeatedly to escape from the menu mode.

The confirmation screen will be displayed.

2.Select OK by pressing I, then press the ENTER button.

3.Display the STATUS and confirm the figure.

NOTE:

•When the projector and/or the screen is tilted, adjust the focus at the centre of the image. The upper and lower edge might be out of focus.

•When the image is distorted in keystone, adjust the KEYSTONE in POSITION menu.

INITIALIZE ALL

You can reset all of the customised settings to the factory defaults except NETWORK, RUNTIME and REMAINING FILTER of STATUS in PROJECTOR SETUP menu.

1.Press the ENTER button.

2.Select OK by pressing I, then press the ENTER button.

3.Turn off the power by pressing the power button.

4.Switch off the MAIN POWER button to reset the projector.

5.Switch on the MAIN POWER button.

6.Press the power button.

7.The minimum required setting screen will be displayed.

See “Minimum required setting screen” on page 13.

NOTE:

•The security system is deactivated by default and when initialised.

•When the projector is initialised, it will be reset to the factory default password operation.

Settings

ENGLISH - 45

Page 44 Page 46
Image 45
Page 44 Page 46
Contents PT-F300E To rain or moisture Important Safety NoticeFor business users in the European Union Important Safety NoticeDeclaration of Conformity DoC Declaration of ConformityEnglish Contents Maintenance SettingsContents AppendixPrecautions with regard to safety Precautions with regard to safety Do not set up the projector outdoorsDo not look into the lens while the projector is being used Do not put your weight on this projector Remove the used batteries from the remote control promptlyUse only the specified batteries Do not mix old and new batteriesOrder to get the best picture quality SecurityLiquid crystal panel Optical componentsAccessories Power cord secure lockMains lead Read this first Minimum required setting screenProjector body About Your ProjectorTop and front view Control panelAbout Your Projector Back and bottom view Auto cleaning filter ACF Front leg Adjusters CompartmentSecurity lock Lamp unit compartment Air exhaust portAttaching a hand strap Top view Remote control indicator Remote controlCLOCK, Clock Phase and Signal Search for Battery compartmentSetting up Screen size and throw distanceCalculation methods Setting up Front leg adjusters and throwing angleProjection method Mounting on the ceiling and projecting from frontLens shift and positioning Adjusting the lens shift leverHorizontal shift Vertical shiftSetting up Projector location range When the screen position is fixedWhen the projector position is fixed Connections Connecting example ComputersBefore connection to the projector LAN terminalConnecting with Video IN/S-VIDEO Connecting example AV equipmentConnecting with DVI-D ConnectionsConnecting Switching the projector on/offDirect power on function Direct power off functionPower indicator Switching the projector on/offPower indicator informs you the status of the power Switching off the projector Switching on the projectorSwitch the Main Power on Press the power button Switch off the Main Power on the back of the projectorSelecting the input signal Projecting an imagePositioning the image Setting up the image position automatically Remote control operationOperating range Facing to the projectorEnlarging the centred area Switching the input signalProjecting an image in INDEX-WINDOW mode Resetting to the factory default settingsCapturing an image Stopping the projectionUsing the laser pointer Using an assigned functionDisable the Laser button Laser pointer beam emitter Shown as PT-F300NTEControlling the volume of the speaker Default Menu NavigationMain menu and Sub-menu Volume Default Balance Default Filter Counter ResetSee CD-ROM contents for more detailed information Menu NavigationOperating procedure Adjusting with the bar scale itemsNavigating through the menu Displaying the Main menuPicture menu Daylight View Color TemperatureDigital Cinema Reality TV-SYSTEMPosition menu Position menu AspectAspect ratio options 169Frame Lock Display Option menu DVI-DON-SCREEN Display Signal Search Auto SetupWide Mode Sxga ModeMenu items Refer Other FunctionsNo Signal SHUT-OFF Projector Setup menuStatus COMPUTER2 SelectHigh Altitude Mode InstallationAudio Setting EmulateTest Pattern Filter Counter ResetInitialize ALL Remaining Filter of Status in ProjectorPassword Change PasswordSecurity menu Text DisplayControl Device Setup Menu Lock PasswordMenu Lock Security menuNetwork menu Wireless LAN PT-F300NTEonlyItems in Network menu Network menu, the following items are availableManaging the indicated problems TEMP, Lamp and Filter IndicatorsLamp indicator Temp indicatorCare and Replacement Cleaning the projectorReplacing the Lamp unit Care and Replacement Replacement procedure Replacing the Auto Cleaning Filter ACFWhen to replace the ACF Before replacing the ACFCounter Reset in Projector Setup Resetting the RemainingTurn the projector upside down and place it gently On a soft clothTroubleshooting Technical Information List of compatible signalsQuality*2 KHz MHzSerial terminal Control commands Technical Information Cable specificationsComputer connection guidance ProjectorSwitching input Signals Lamp switchingInput signal Remote terminalCeiling mount bracket safeguards Installing the safety cableDVI-D in terminal Screen size and throw distance for 169 aspect ratio Specifications Wireless channel Wireless LAN CompatibleDimensions WeightDimensions Trademark acknowledgementsUnit mm Index Aspect Audio Audio SettingIndex Picture Mode

PT-F300NTE, PT-F300E specifications

The Panasonic PT-F300E and PT-F300NTE are advanced projectors that deliver exceptional performance and versatility for various applications, from educational environments to corporate settings. Both models incorporate cutting-edge technologies and design features that make them stand out in the competitive projector market.

One of the primary features of the PT-F300E and PT-F300NTE is their impressive brightness levels, achieving up to 3000 ANSI lumens. This high brightness makes them suitable for use in well-lit rooms, ensuring that presentations remain clear and vibrant without the need for dimming the lights. Furthermore, the projectors utilize a high-quality LCD panel that enhances color reproduction and overall image quality, delivering bright, vivid images that captivate audiences.

In terms of resolution, both models support native XGA (1024 x 768) resolution, making them ideal for displaying standard-definition content. The projectors incorporate DLP technology, which helps in producing sharp images with excellent contrast ratios. This is particularly beneficial for detailed visuals, such as graphs and charts, ensuring that every element is easily visible to viewers.

Connectivity features are versatile and user-friendly, with multiple input options including HDMI, VGA, and component video. This wide range of connectivity allows users to easily connect laptops, cameras, and other devices, making it convenient for various setup scenarios. Additionally, the projectors support network capabilities, enabling remote monitoring and control, which is especially useful for institutions with multiple units deployed across locations.

Another significant characteristic of the PT-F300E and PT-F300NTE is their low maintenance requirements. The projectors are designed with long-lasting components, including a lamp life that lasts up to 6,000 hours in economy mode. This longevity reduces the need for frequent replacements, lowering running costs and making them more economical over time.

Furthermore, these projectors feature advanced cooling technology to minimize noise levels, ensuring a quieter operation that doesn't distract from the presentation content. This is particularly important in classroom environments where concentration is key.

In conclusion, the Panasonic PT-F300E and PT-F300NTE projectors combine brightness, high-resolution imaging, versatile connectivity, and low maintenance, making them an excellent choice for a wide range of applications. Their robust features and reliable performance make them a trusted option for educators and professionals alike, ensuring that they can deliver impactful presentations with ease.
Top Page Image Contents