Panasonic PT-F300NTE, PT-F300E Remote control operation, Operating range, Facing to the projector

Page 27

Remote control operation

Operating range

You can operate the projector with the remote control within the remote range 15 m (49'2"), approximately

± 30° vertically and horizontally.

Facing to the projector

Ensure the remote control emitter is facing to the remote control signal receptor on front/back of the projector and press the required buttons to operate.

Facing to the screen

Ensure the remote control emitter is facing to the screen and press the required buttons to operate the projector. The signal will be reflected off the screen. The operating range may differ due to the screen material. This function may not be effective with a translucent screen.

NOTE:

• Do not let strong light shine onto the signal receptor. The remote control may malfunction under strong light such as fluorescent.

• If there are any obstacles between the remote control and the remote control signal receptor, the remote control may not operate correctly.

(Shown as PT-F300NTE)

Setting up the image position automatically

Basic Operation

You can adjust the setting of SHIFT, DOT CLOCK and CLOCK PHASE in the POSITION menu automatically for the projected COMPUTER signal image.

With DVI signal, adjust SHIFT setting only.

NOTE:

•If the dot clock frequency is 150 MHz or higher, AUTO SETUP is not effective.

•If the projected image is dark or blurred around the edge, AUTO SETUP may stop the processing before complete. Project a much clearer or lighter image and press the AUTO SETUP button again.

•When there is no signal input and SIGNAL SEARCH in DISPLAY OPTION menu is ON, the auto signal detecting system will start.

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Screen

 

 

 

 

Projected image

ENGLISH - 27

Page 26 Page 28
Image 27
Page 26 Page 28
Contents PT-F300E To rain or moisture Important Safety NoticeFor business users in the European Union Important Safety NoticeDeclaration of Conformity DoC Declaration of ConformityEnglish Contents Appendix SettingsMaintenance ContentsPrecautions with regard to safety Precautions with regard to safety Do not set up the projector outdoorsDo not look into the lens while the projector is being used Do not mix old and new batteries Remove the used batteries from the remote control promptlyDo not put your weight on this projector Use only the specified batteriesOptical components SecurityOrder to get the best picture quality Liquid crystal panelAccessories Power cord secure lockMains lead Read this first Minimum required setting screenControl panel About Your ProjectorProjector body Top and front viewLamp unit compartment Air exhaust port Auto cleaning filter ACF Front leg Adjusters CompartmentAbout Your Projector Back and bottom view Security lockBattery compartment Remote controlAttaching a hand strap Top view Remote control indicator CLOCK, Clock Phase and Signal Search forSetting up Screen size and throw distanceCalculation methods Mounting on the ceiling and projecting from front Front leg adjusters and throwing angleSetting up Projection methodVertical shift Adjusting the lens shift leverLens shift and positioning Horizontal shiftSetting up Projector location range When the screen position is fixedWhen the projector position is fixed LAN terminal Connecting example ComputersConnections Before connection to the projectorConnections Connecting example AV equipmentConnecting with Video IN/S-VIDEO Connecting with DVI-DDirect power off function Switching the projector on/offConnecting Direct power on functionPower indicator Switching the projector on/offPower indicator informs you the status of the power Switch off the Main Power on the back of the projector Switching on the projectorSwitching off the projector Switch the Main Power on Press the power buttonSelecting the input signal Projecting an imagePositioning the image Facing to the projector Remote control operationSetting up the image position automatically Operating rangeEnlarging the centred area Switching the input signalStopping the projection Resetting to the factory default settingsProjecting an image in INDEX-WINDOW mode Capturing an imageLaser pointer beam emitter Shown as PT-F300NTE Using an assigned functionUsing the laser pointer Disable the Laser buttonControlling the volume of the speaker Default Menu NavigationMain menu and Sub-menu Menu Navigation Filter Counter ResetVolume Default Balance Default See CD-ROM contents for more detailed informationDisplaying the Main menu Adjusting with the bar scale itemsOperating procedure Navigating through the menuPicture menu TV-SYSTEM Color TemperatureDaylight View Digital Cinema RealityPosition menu 169 AspectPosition menu Aspect ratio optionsFrame Lock Display Option menu DVI-DON-SCREEN Display Sxga Mode Auto SetupSignal Search Wide ModeMenu items Refer Other FunctionsCOMPUTER2 Select Projector Setup menuNo Signal SHUT-OFF StatusEmulate InstallationHigh Altitude Mode Audio SettingRemaining Filter of Status in Projector Filter Counter ResetTest Pattern Initialize ALLText Display PasswordPassword Change Security menuSecurity menu Menu Lock PasswordControl Device Setup Menu LockNetwork menu, the following items are available Wireless LAN PT-F300NTEonlyNetwork menu Items in Network menuTemp indicator TEMP, Lamp and Filter IndicatorsManaging the indicated problems Lamp indicatorCare and Replacement Cleaning the projectorReplacing the Lamp unit Before replacing the ACF Replacing the Auto Cleaning Filter ACFCare and Replacement Replacement procedure When to replace the ACFOn a soft cloth Resetting the RemainingCounter Reset in Projector Setup Turn the projector upside down and place it gentlyTroubleshooting KHz MHz List of compatible signalsTechnical Information Quality*2Serial terminal Projector Technical Information Cable specificationsControl commands Computer connection guidanceRemote terminal Lamp switchingSwitching input Signals Input signalCeiling mount bracket safeguards Installing the safety cableDVI-D in terminal Screen size and throw distance for 169 aspect ratio Specifications Weight Wireless LAN CompatibleWireless channel DimensionsDimensions Trademark acknowledgementsUnit mm Index Aspect Audio Audio SettingIndex Picture Mode

PT-F300NTE, PT-F300E specifications

The Panasonic PT-F300E and PT-F300NTE are advanced projectors that deliver exceptional performance and versatility for various applications, from educational environments to corporate settings. Both models incorporate cutting-edge technologies and design features that make them stand out in the competitive projector market.

One of the primary features of the PT-F300E and PT-F300NTE is their impressive brightness levels, achieving up to 3000 ANSI lumens. This high brightness makes them suitable for use in well-lit rooms, ensuring that presentations remain clear and vibrant without the need for dimming the lights. Furthermore, the projectors utilize a high-quality LCD panel that enhances color reproduction and overall image quality, delivering bright, vivid images that captivate audiences.

In terms of resolution, both models support native XGA (1024 x 768) resolution, making them ideal for displaying standard-definition content. The projectors incorporate DLP technology, which helps in producing sharp images with excellent contrast ratios. This is particularly beneficial for detailed visuals, such as graphs and charts, ensuring that every element is easily visible to viewers.

Connectivity features are versatile and user-friendly, with multiple input options including HDMI, VGA, and component video. This wide range of connectivity allows users to easily connect laptops, cameras, and other devices, making it convenient for various setup scenarios. Additionally, the projectors support network capabilities, enabling remote monitoring and control, which is especially useful for institutions with multiple units deployed across locations.

Another significant characteristic of the PT-F300E and PT-F300NTE is their low maintenance requirements. The projectors are designed with long-lasting components, including a lamp life that lasts up to 6,000 hours in economy mode. This longevity reduces the need for frequent replacements, lowering running costs and making them more economical over time.

Furthermore, these projectors feature advanced cooling technology to minimize noise levels, ensuring a quieter operation that doesn't distract from the presentation content. This is particularly important in classroom environments where concentration is key.

In conclusion, the Panasonic PT-F300E and PT-F300NTE projectors combine brightness, high-resolution imaging, versatile connectivity, and low maintenance, making them an excellent choice for a wide range of applications. Their robust features and reliable performance make them a trusted option for educators and professionals alike, ensuring that they can deliver impactful presentations with ease.
Top Page Image Contents