Zebra Technologies UMAN-MZA-007 manual Approximate Charge Times

Page 13

Figure 4: Charging the Battery

MZ Series Charger Power Supply p/n AT17947-1

110-240 VAC 50-60 Hz 0.6A Input; 12 VDC 1.25 A output Plug into AC receptacle

Charger Jack

12 VDC

Charging the battery

Refer to Figure 4.

1.Plug the Charger Power Supply into the appropriate A.C. wall receptacle. Then insert the charge cable into the printer’s charger jack.

2.The printer’s charger indicator will indicate the status of the charger as follows:

•An amber light indicates the battery is charging, and that the battery is less than 90% charged.

•A green light indicates the battery is fully charged. The battery is ready for use.

Approximate Charge Times :

Batteries are fully charged after 2.5 hours from the low-bat- tery shut-off state. Partially discharged batteries will take less time to charge.

NOTES: Use of the printer while charging will increase charge times. Charge times are for completely discharged batteries.

As a safety feature the battery will stop charging after 4.5 hours regardless of the battery’s charge state.

13

MZ Series User Guide

Image 13

Contents UMAN-MZS-007 rev. B May Page Table of Contents Product Support Contacts Product Improvements Proprietary StatementsCopyrights Document Conventions Unpacking and Inspection Introduction to the MZ SeriesReporting Damage MZ Series Overview MZ 220 Illustrated Installing and Removing the Battery BatteryGetting Ready to Print Removing the Battery Mains Adapter Charging the BatteryApproximate Charge Times MZ Series Quad Power Station MZ Series Quad Power StationCharger Safety Battery SafetyOpening the MZ Printer MZ 220 shown Loading the Media All modelsUsing Pre-Printed Receipt Media Installing Media Operator Controls Printer Controls Printing a Configuration Label Connecting the PrinterVerify the Printer Is Working Cable Communications Cable CommunicationIR Communication Zone IR CommunicationsBluetooth Networking Overview Wireless Communications with BluetoothWlan Overview Setting Up the SoftwareBelt Clip Wearing the PrinterUsing the Optional Shoulder Strap Adjustable Shoulder StrapExtending Battery Life Preventive MaintenanceMZ Series Cleaning Instructions General Cleaning InstructionsMZ Series Cleaning Interpreting Indicators TroubleshootingTroubleshooting Topics MZ Series User Guide Determining Your Printer Version Resetting an MZ Series PrinterCommunications Diagnostics Troubleshooting TestsCalling Technical Support Configuration Label Example MZ 220 illustrated Configuration Label Example Configuration Label Example Printing Specifications SpecificationsMemory and Communications Specifications, MZ series Media SpecificationsUCC/EAN Font and Bar Code Specifications for MZ SeriesUSB Communications Port Physical, Environmental and Electrical SpecificationsMZ 220 Overall Dimensions Description Adjustable shoulder strap MZ Series AccessoriesInterface Cables USB Cable Appendix aAppendix B Maintenance SuppliesAppendix C Media SuppliesAppendix D Battery DisposalProduct Disposal Product Support Appendix ERegional Headquarters Product Support ContactsAppendix F Using zebra.comMZ Series User Guide Appendices Index Patent Numbers Zebra Technologies Corporation