Zebra Technologies UMAN-MZA-007 manual MZ Series User Guide

Page 32

•Check quality of media.

•If using label media, ensure the “Tone” setting is set to 50.

4.Partial or missing print:

•Check media alignment.

•Clean printhead.

•Ensure Media Cover is properly closed and latched.

5.No print:

•Replace battery.

•Check cable to terminal.

•(Wireless units only) Restore wireless connection.

6.Reduced battery life:

•Check battery date code — if battery is one to two years old, short life may be due to normal aging.

•Recharge or replace battery.

7.Flashing Amber indicator:

•Check that media is loaded and that printhead is closed and securely latched.

•If media is present and latch is closed, indicates that no application is present or application is corrupted. Program must be re-loaded.

8.Communication Error:

•(Wireless units only) Check that media is loaded, head is closed and blue communication link light is on.

•(USB) Replace cable to terminal.

9.Label Jam:

•Open media cover.

•Generously apply alcohol to Printer in area of jammed label.

10.Battery Pack Is Hard to Install

•Do not force the battery into place. Verify you have not pinched any wires between the battery and the printer.

•Verify you are plugging the battery connector into the printer correctly.

32

MZ Series User Guide

Image 32

Contents UMAN-MZS-007 rev. B May Page Table of Contents Product Support Contacts Proprietary Statements Product ImprovementsCopyrights Document Conventions Reporting Damage Introduction to the MZ SeriesUnpacking and Inspection MZ Series Overview MZ 220 Illustrated Getting Ready to Print BatteryInstalling and Removing the Battery Removing the Battery Charging the Battery Mains AdapterApproximate Charge Times MZ Series Quad Power Station MZ Series Quad Power StationBattery Safety Charger SafetyLoading the Media All models Opening the MZ Printer MZ 220 shownUsing Pre-Printed Receipt Media Installing Media Operator Controls Printer Controls Verify the Printer Is Working Connecting the PrinterPrinting a Configuration Label Cable Communication Cable CommunicationsIR Communications IR Communication ZoneWireless Communications with Bluetooth Bluetooth Networking OverviewSetting Up the Software Wlan OverviewWearing the Printer Belt ClipAdjustable Shoulder Strap Using the Optional Shoulder StrapPreventive Maintenance Extending Battery LifeGeneral Cleaning Instructions MZ Series Cleaning InstructionsMZ Series Cleaning Troubleshooting Topics TroubleshootingInterpreting Indicators MZ Series User Guide Resetting an MZ Series Printer Determining Your Printer VersionTroubleshooting Tests Communications DiagnosticsCalling Technical Support Configuration Label Example MZ 220 illustrated Configuration Label Example Configuration Label Example Specifications Printing SpecificationsMemory and Communications Specifications, MZ series Media SpecificationsFont and Bar Code Specifications for MZ Series UCC/EANPhysical, Environmental and Electrical Specifications USB Communications PortMZ 220 Overall Dimensions MZ Series Accessories Description Adjustable shoulder strapAppendix a Interface Cables USB CableMaintenance Supplies Appendix BAppendix C Media SuppliesProduct Disposal Battery DisposalAppendix D Appendix E Product SupportProduct Support Contacts Regional HeadquartersUsing zebra.com Appendix FMZ Series User Guide Appendices Index Patent Numbers Zebra Technologies Corporation