Specifications
Note.- Printer specifications are subject to change without notice.
Printing Specifications
Parameter | MZ 220 | MZ 320 | |
|
|
| |
Print Width | Up to 1.89 in. (48,0 mm) | Up to 2.9 in. (71,2 mm) | |
Print Speed (max) | 3” per second (76,2 mm/second) | ||
Print Speed (normal) | 2” per second (5,0 mm/second) | ||
Print Head Life, | 1 x 106 in. (25,4 Km) nominal | ||
calculated | |||
|
| ||
Print Density | 203 dots/inch (8 dots/mm) | ||
Printhead Burn | 0.2 in. (5,08 mm) | ||
Line to Tear Edge | |||
|
| ||
|
|
| |
Memory and Communications Specifications, MZ series
Flash Memory
SRAM
Standard Communications
Optional Wireless Communications
8MB 16 MB
USB 2.0 Full Speed Interface (12 Mbps)
&Infrared wireless link (meets IrDA 1.1 communications specifications )
Optional Bluetooth compatible module Optional 802.11b/g SRRF module
Only one wireless option may be installed in a printer.
Media Specifications
Parameter
Width
Max. Width
Printable
Area Length
Label Thickness
Max. Media Roll
dia.
Label Inner Core
Diameter
Black Mark
Dimensions
MZ 220 | MZ 320 |
2.0 ± .03 in. | 3.0 ± .03 in. |
(50,8 ±0,8 mm) | (76,2 mm ±0,8 mm) |
1.9” (48,3 mm) | 2.9” (73,7 mm) |
|
|
Maximum length will vary with the size of loaded applications. Refer to the configuration label for actual maximum label size.
.002 in to .004 in (0,050 mm to 0,102 mm)
1.88in. (47,8 mm) O.D.
0.40to 0.75 in.. (10,2 to 19,0 mm)
The reflective media black marks should extend past the centerline of the roll on the front side of the media. Minimum mark width: 0.59 in. (15 mm) perpendicular to edge of media, centered within the width of the roll. Mark length: 0.19 - 0.24 in.
Use Zebra brand direct thermal or UV resistant coated media that is outside wound. Refer to Appendix “B” for more details.
39