MZ Series Quad Power Station
The MZ series Quad Power Station is designed to dock and charge up to four MZ series printers of either type simultane- ously.
1.Ensure that the Power Station has been installed properly per its instruction manual. Ensure that the power supply is properly connected and its power indicator light is on.
2.Slide a printer into any one of the four docking bays as shown in Figure 5.
NOTES: If you are using a shoulder strap, ensure it is pulled away from the printer when installing in the Power Station.
Do not use the printer when it is installled in the Power Station
The printer’s charge status indicator will turn amber if the printer is properly inserted and the battery is less than 90% charged.
The printer’s charge indicators will allow you to monitor the
Figure 5: MZ Series Quad Power Station
MZ 220 Printer | |
MZ 320 Printer |
|
| SlidePrinterintodockingbay |
Green (Power) | Amber/Green (Charge) |
Indicator | Indicator |
| 14 |
MZ Series User Guide