Introduction
Rockford engineers designed the Power series amplifiers to withstand the rugged automotive environment while delivering superior sound quality in a flexible, reliable, and efficient package. TRANS•ana is a low voltage cir- cuit in the preamp stage lets the music sound crystal clear and very real, even when played at high volume levels. This is matched with TOPAZ, a unique grounding circuit used to eliminate noise problems associated with car audio systems and their installation. Flexibility is accomplished with the use of a
Power Amplifier Accessory Pack
The accessory pack shipped with the Power amplifiers includes the mount- ing hardware necessary to secure the amp to the vehicle.
Installation & Operation Manual Punch Verification Certificate
(4) Amplifier mounting screws (#8 x 3/4" Phillips)
(4)Speaker/Power connector set screws (3/32" Allen)
(4)Endbell mounting screws (9/64" Allen)
(1)Allen wrench (3/32")
(1)Allen wrench (9/64")
(1)Inline fuseholder (Power 250, Power 360 & Power 400 amps)
(1)AGU 30 amp fuse (Power 250
(1)AGU 40 amp fuse (Power 360
(1)AGU 50 amp fuse (Power 400
(1)Remote Punch Bass (replacement part
(1)15' Remote Punch Bass cable (replacement part
(2)Remote Punch Bass bracket screws (4 x 7/16" Phillips)
NOTE: Refer to the specifications section for recommended fuse sizes on the Power 800
– 1 –