Zebra Technologies R402 manual Troubleshooting, Resolutions, Printer is not receiving power

Page 51

Troubleshooting

What the Status Light is Telling You

Status LED	Printer	For a Resolution,
Condition and Color	Status	Refer to number:

Off	Off	1

Solid Green	On	2

Flashing Yellow	Stopped	3

Flashing Green	Normal Operation	4

Flashing Red	Stopped	5

Double Flashing Green	Paused	6

Solid Yellow	Various	7

Alternately Flashing Green and Red	Needs Service	8

Resolutions

1.The printer is not receiving power.

■Have you turned on the printer power?

■Check power connections from the wall outlet to the power supply, and from the power supply to the printer.

2.The printer is on and in an idle state.

■No action necessary.

Image 51

Contents Users Guide R402Page Proprietary Statement Page Contents Operation & Options Appendix 980389-001 Rev. a Hello IntroductionWhat’s in the Box? Opening the printer Inspecting the PrinterInspecting the Printer Closing the printer Reporting Damage Modes of Printing Getting StartedAttaching Power Supply Placing the Roll in the Media Compartment Loading Roll MediaAdjusting the Guides Using the Optional Media Adapter Plates Install the Ribbon Supply Roll Install the Take-Up CoreLoading Ribbon Attach and Tighten the Ribbon Auto Calibration Status Light Power SwitchOperator Controls Feed ButtonPrinting a Test Label Hooking Up the Printer and Computer Parallel Interface RequirementsInterface Cable Requirements Communicating with the Printer Adjusting the Print WidthAdjusting the Print Darkness Adjusting the Print SpeedThermal Printing Operation & OptionsReplacing Supplies Adding a New Transfer RibbonReplacing a Partially Used Transfer Ribbon Printing in Peel-Mode Printing on Fan-Fold Media Rfid Guidelines Supported Transponders Texas Instruments Tag-it Transponders Philips ICode Blocks Philips ICode TranspondersInside Technologies Picotag 2K Inside Technologies Picotag TranspondersISO-15693 Transponders WT Write Tag ZPL II Commands for RfidRT Read Tag RT Read Tag RS Rfid Setup RI Rfid Get Tag Unique ID Sample of Rfid Programming WT6FDZebraFS FO100,100A0n,60FN0FS Page Maintenance CleaningLubrication Description Parts ListPage Removal Replacing the Print HeadCleaning the Print Head Page Printer is on and in an idle state TroubleshootingResolutions Printer is not receiving powerEither the media or ribbon is out Printer has failed its power on self test PostThere is a shortage of memory Printer is receiving dataPrint head is under temperature Print head is over temperatureFlash memory is not programmed Printed image does not look right Print Quality ProblemsRibbon sensor settings did not print No print on the labelLabel format was sent to, but not recognized by, the printer Nothing is printed Rfid SymptomsRfid tags generally not programmed Void messages are printed across mediaManual Calibration Troubleshooting Tests Printing a Configuration LabelRecalibration Communications Diagnostics Resetting the Factory Default ValuesFeed Button Modes Power Off Mode Communications Diagnostics ModeAppendix Physical SpecificationsMedia Specifications Font/Code Specifications Options Parallel Interface Technical Information Page Cable calibration IndexQuality problems Voltage Write tag command Page