Nortel Networks WAG54G manual Wireless Connection to a Computer

Page 20

Wireless-G ADSL Gateway

Wireless Connection to a Computer

If you want to use a wireless connection to access the Gateway, follow these instructions:

1.Make sure that all of your network’s hardware is powered off, including the Gateway and all computers.

2.Connect a phone cable from the Line port on the Gateway’s back panel to the wall jack of the ADSL line. A small device called a microfilter (not included) may be necessary between each phone and wall jack to prevent interference. Contact your ISP if you have any questions.

IMPORTANT: For countries that have phone jacks with RJ-11 connectors, make sure you only place the microfilters between the phone and the wall jack and not between the Gateway and the wall jack or your ADSL will not connect.

For countries that do not have phone jacks with RJ-11 connectors (e.g. France, Sweden, Switzerland, United Kingdom, etc.), except for ISDN users, the microfilter has to be used between the Gateway and the wall jack, because the microfilter will have the RJ-11 connector.

Annex B users (E1 and DE versions of the Gateway) must use the included special cable to connect the Gateway to the wall jack (RJ-45 to RJ-12). If you require splitters or special jacks, please contact your service provider.

3.Connect the power adapter to the Power port, plug the power adapter into a power outlet, and press the Gateway’s power button.

The Power LED on the front panel will light up red as soon as the Gateway is turned on. The Power LED will next flash green for a few seconds, and then it will be solidly lit when the self-test is complete. If the LED flashes for one minute or longer, see “Appendix A: Troubleshooting.”

4.Power on one of the computers on your wireless network(s).

5.For initial access to the Gateway through a wireless connection, make sure the computer’s wireless adapter has its SSID set to linksys (the Gateway’s default setting), and its wireless security is disabled. After you have accessed the Gateway, you can change the Gateway and this computer’s adapter settings to match your usual network settings.

Go to “Chapter 5: Configuring the Wireless-G ADSL Gateway.”

Chapter 4: Connecting the Wireless-G ADSL Gateway

Figure 4-4: Connect the ADSL Line

Figure 4-5: Connect the Power

NOTE: You should always change the SSID from its default, linksys, and enable wireless security.

13

Wireless Connection to a Computer

Image 20
Contents 802 GHz .11g Wireless- G Word definition How to Use this GuideCopyright and Trademarks Table of Contents Wireless-G Adsl Gateway Ports and Reset Button on Side Panel Network24 Advanced Wireless Settings Figure C-2 MAC Address/Adapter Address Introduction WelcomeWhat’s in this User Guide? Wireless-G Adsl Gateway Planning Your Network Gateway’s FunctionsIP Addresses What’s an IP Address?Dynamic IP Addresses What is a VPN?Dhcp Dynamic Host Configuration Protocol Servers Why do I need a VPN? VPN Gateway to VPN GatewayWireless-G Adsl Gateway Getting to Know the Wireless-G Adsl Gateway Ports and Reset Button on Side PanelLEDs and Power Button on Side Panel PowerBottom Panel Bottom Panel with Stand Closed PositionConnecting the Wireless-G Adsl Gateway OverviewWired Connection to a Computer Connect the Adsl LineWireless Connection to a Computer Configuring the Wireless-G Adsl Gateway SetupWireless SecurityAccess Restriction AdministrationApplications & Gaming StatusHow to Access the Web-based Utility Setup TabBasic Setup Tab Internet SetupRFC 1483 Bridged Dynamic IP Static IPRFC 1483 Routed RFC 1483 RoutedIPoA RFC 2516 PPPoEBridged Mode Only RFC 2364 PPPoAOptional Settings required by some ISPs Network SetupConfiguring the Wireless-G Adsl Gateway Setup Tab TZO.com Ddns TabDynDNS.org Advanced Routing Tab Advanced Routing15 Routing Table Wireless Tab Basic Wireless Settings TabWireless Security Tab Wireless NetworkWPA Pre-Shared Key WPA RadiusWireless Client MAC List screen Wireless Access TabWireless Network Access Advanced Wireless Settings Tab Advanced WirelessSecurity Tab Firewall TabFirewall Additional FiltersIPSec VPN Tunnel VPN TabVPN Passthrough 28 VPN Settings Summary 29 Advanced IPSec Settings Access Restriction Tab Internet Access Tab33 List of PCs Single Port Forwarding Applications & Gaming TabSingle Port Forwarding Tab Port Range Forwarding Tab Port Triggering TabDMZ Tab QoS TabQoS PVC QoS PriorityEdit list of QoS Settings 40 Edit List of QoS SettingsManagement Tab Administration TabGateway Access Snmp UPnPTelnet IGMP-ProxyIGMP-Snooping Email Alerts Reporting TabReporting Diagnostics Tab Backup&Restore TabBackup Configuration Restore ConfigurationFactory Defaults Tab Firmware Upgrade TabReboot Tab Upgrade from LANStatus Tab Gateway TabGateway Information Internet ConnectionLocal Network Tab 51 Local Network54 Wireless PVC Connection DSL Connection TabDSL Status Need to set a static IP address on a computer Appendix a TroubleshootingCommon Problems and Solutions Want to test my Internet connection Wireless-G Adsl Gateway Wireless-G Adsl Gateway TCP UDP Can’t get the Internet game, server, or application to work To start over, I need to set the Gateway to factory default Need to upgrade the firmwareFirmware upgrade failed, and/or the Power LED is flashing My DSL service’s PPPoE is always disconnectingPower LED flashes continuously Frequently Asked Questions Where is the Gateway installed on the network?Is IPSec Passthrough supported by the Gateway? Does the Gateway support IPX or AppleTalk?What is Network Address Translation and what is it used for? Does the Gateway support ICQ send file?What is DMZ Hosting? What are the advanced features of the Gateway? What is the Ieee 802.11g standard?Is the Gateway cross-platform compatible? How many ports can be simultaneously forwarded?What Ieee 802.11b and 802.11g features are supported? What is ad-hoc mode?What is infrastructure mode? What is roaming?What is the ISM band? What is Spread Spectrum?What is DSSS? What is FHSS? And what are their differences? What is WEP?Have excellent signal strength, but I cannot see my network How do I reset the Gateway?How do I resolve issues with signal loss? Security Threats Facing Wireless Networks Appendix B Wireless SecuritySecurity Precautions Appendix B Wireless Security Wireless-G Adsl Gateway Figure C-1 IP Configuration Screen Windows 98 or Me InstructionsWindows 2000 or XP Instructions Figure C-3 MAC Address/Physical AddressFigure D-1 Firmware Upgrade Appendix D Upgrading FirmwareAppendix E Glossary Wireless-G Adsl Gateway Wireless-G Adsl Gateway Wireless-G Adsl Gateway Wireless-G Adsl Gateway Appendix F Specifications Storage Humidity Appendix G Regulatory Information Dual-Band Wireless Access Point Dual-Band Wireless Access Point Wireless-G Adsl Gateway Wireless-G Adsl Gateway Applicable Power Levels in France Location Frequency Range MHz Power EirpOpen the Wireless Network Connection window Wireless-G Adsl Gateway Wireless-G Adsl Gateway Wireless-G Adsl Gateway Wireless-G Adsl Gateway Wireless-G Adsl Gateway Wireless-G Adsl Gateway Appendix H Warranty Information Appendix I Contact Information Europe Mail AddressOutside of Europe Mail Address

WAG54G specifications

Nortel Networks WAG54G is a robust and versatile wireless access gateway that has made significant strides in providing seamless connectivity for both home and small business environments. Designed with the intention of integrating both wired and wireless networking, this device bridges the gap between traditional Ethernet connections and the burgeoning needs of modern wireless communication.

One of the key features of the WAG54G is its ability to deliver high-speed Internet access through multiple protocols, including ADSL and DSL. This flexibility allows users to enjoy fast Internet speeds while simultaneously managing their internal network. The device is equipped with advanced Quality of Service (QoS) features that prioritize traffic, ensuring that critical applications receive the necessary bandwidth for optimal performance.

The WAG54G is powered by advanced 802.11g wireless technology, which offers wireless data rates of up to 54 Mbps. This enables users to stream videos, make VoIP calls, and engage in online gaming without significant lag, enhancing the overall user experience. The device supports a range of wireless security protocols, including WEP, WPA, and WPA2 encryption, ensuring that user data remains secure from potential threats and unauthorized access.

Another noteworthy characteristic of the WAG54G is its straightforward setup process. The unit comes with a user-friendly web interface that simplifies configuration, allowing users to customize their network settings with ease. The WAG54G also features multiple Ethernet ports for wired connections, making it an ideal solution for homes and offices with multiple devices requiring stable Internet connectivity.

In addition to its core functionalities, the WAG54G supports features such as network address translation (NAT) and a built-in firewall that enhances security while allowing multiple devices to share a single Internet connection. The device also incorporates features like DHCP server capabilities and UPnP support, streamlining network management.

Overall, Nortel Networks WAG54G delivers a compelling mix of performance, security, and manageability. Its combination of wired and wireless capabilities, alongside robust security measures, makes it suitable for various networking needs in today’s digital landscape. Users can count on the WAG54G to provide a reliable and efficient solution that supports the demands of modern Internet usage.