Nortel Networks WAG54G manual Snmp, UPnP

Page 48

Wireless-G ADSL Gateway

fields provided. To specify a range of IP addresses, select IP range and enter the range of IP addresses in the fields provided.

• Use https. Clear this check box if you do not want to use HTTPS encryption on remote management links.

Remote Upgrade. This feature allows the Gateway’s firmware to be upgraded remotely by a TFTP server. To enable Remote Upgrade, click Enable.

SNMP

SNMP is a popular network monitoring and management protocol. To enable SNMP, click Enabled. To disable

SNMP, click Disabled.

If enabled, then specify the IP address(es) allowed to have SNMP access. Select All to allow all IP addresses with no restrictions, IPaddr to specify a single IP address, or IP range to specify a range of IP addresses.

Device Name. Enter the name of the Gateway.

SNMP v1/v2: Get Community. Enter the password that allows read-only access to the Gateway’s SNMP information.

Set Community. Enter the password that allows read/write access to the Gateway’s SNMP information.

SNMP V3. Click Enable if you wish to manage the Gateway using SNMP version 3.

Rw User. Enter a name for the user who will have read/write access to the Gateway’s settings. The default name is v3rwuser.

Authentication protocol and password. Select an authentication protocol and enter a password. It is recommended that the password be at least eight characters long.

Privacy protocol and password. To enable encryption of SNMP version 3 communications, select CBC-DES and enter a password. If encryption is not desired, select None.

Trap Management: Trap to. Enter the IP address of the remote host computer that will receive the trap messages.

UPnP

UPnP allows Windows Me and XP to automatically configure the Gateway for various Internet applications, such as gaming and videoconferencing.

Chapter 5: Configuring the Wireless-G ADSL Gateway

41

The Administration Tab

Image 48
Contents 802 GHz .11g Wireless- G How to Use this Guide Copyright and TrademarksWord definition Table of Contents Wireless-G Adsl Gateway Ports and Reset Button on Side Panel Network24 Advanced Wireless Settings Figure C-2 MAC Address/Adapter Address Introduction WelcomeWhat’s in this User Guide? Wireless-G Adsl Gateway Planning Your Network Gateway’s FunctionsIP Addresses What’s an IP Address?What is a VPN? Dhcp Dynamic Host Configuration Protocol ServersDynamic IP Addresses Why do I need a VPN? VPN Gateway to VPN GatewayWireless-G Adsl Gateway Getting to Know the Wireless-G Adsl Gateway Ports and Reset Button on Side PanelLEDs and Power Button on Side Panel PowerBottom Panel Bottom Panel with Stand Closed PositionConnecting the Wireless-G Adsl Gateway OverviewWired Connection to a Computer Connect the Adsl LineWireless Connection to a Computer Configuring the Wireless-G Adsl Gateway SetupWireless SecurityAccess Restriction AdministrationApplications & Gaming StatusHow to Access the Web-based Utility Setup TabBasic Setup Tab Internet SetupRFC 1483 Bridged Dynamic IP Static IPRFC 1483 Routed RFC 1483 RoutedIPoA RFC 2516 PPPoEBridged Mode Only RFC 2364 PPPoAOptional Settings required by some ISPs Network SetupConfiguring the Wireless-G Adsl Gateway Setup Tab Ddns Tab DynDNS.orgTZO.com Advanced Routing Tab Advanced Routing15 Routing Table Wireless Tab Basic Wireless Settings TabWireless Security Tab Wireless NetworkWPA Pre-Shared Key WPA RadiusWireless Access Tab Wireless Network AccessWireless Client MAC List screen Advanced Wireless Settings Tab Advanced WirelessSecurity Tab Firewall TabFirewall Additional FiltersVPN Tab VPN PassthroughIPSec VPN Tunnel 28 VPN Settings Summary 29 Advanced IPSec Settings Access Restriction Tab Internet Access Tab33 List of PCs Applications & Gaming Tab Single Port Forwarding TabSingle Port Forwarding Port Range Forwarding Tab Port Triggering TabDMZ Tab QoS TabQoS PVC QoS PriorityEdit list of QoS Settings 40 Edit List of QoS SettingsAdministration Tab Gateway AccessManagement Tab Snmp UPnPIGMP-Proxy IGMP-SnoopingTelnet Reporting Tab ReportingEmail Alerts Diagnostics Tab Backup&Restore TabBackup Configuration Restore ConfigurationFactory Defaults Tab Firmware Upgrade TabReboot Tab Upgrade from LANStatus Tab Gateway TabGateway Information Internet ConnectionLocal Network Tab 51 Local Network54 Wireless DSL Connection Tab DSL StatusPVC Connection Appendix a Troubleshooting Common Problems and SolutionsNeed to set a static IP address on a computer Want to test my Internet connection Wireless-G Adsl Gateway Wireless-G Adsl Gateway TCP UDP Can’t get the Internet game, server, or application to work To start over, I need to set the Gateway to factory default Need to upgrade the firmwareFirmware upgrade failed, and/or the Power LED is flashing My DSL service’s PPPoE is always disconnectingPower LED flashes continuously Frequently Asked Questions Where is the Gateway installed on the network?Is IPSec Passthrough supported by the Gateway? Does the Gateway support IPX or AppleTalk?What is Network Address Translation and what is it used for? Does the Gateway support ICQ send file?What is DMZ Hosting? What are the advanced features of the Gateway? What is the Ieee 802.11g standard?Is the Gateway cross-platform compatible? How many ports can be simultaneously forwarded?What Ieee 802.11b and 802.11g features are supported? What is ad-hoc mode?What is infrastructure mode? What is roaming?What is the ISM band? What is Spread Spectrum?What is DSSS? What is FHSS? And what are their differences? What is WEP?How do I reset the Gateway? How do I resolve issues with signal loss?Have excellent signal strength, but I cannot see my network Appendix B Wireless Security Security PrecautionsSecurity Threats Facing Wireless Networks Appendix B Wireless Security Wireless-G Adsl Gateway Figure C-1 IP Configuration Screen Windows 98 or Me InstructionsWindows 2000 or XP Instructions Figure C-3 MAC Address/Physical AddressFigure D-1 Firmware Upgrade Appendix D Upgrading FirmwareAppendix E Glossary Wireless-G Adsl Gateway Wireless-G Adsl Gateway Wireless-G Adsl Gateway Wireless-G Adsl Gateway Appendix F Specifications Storage Humidity Appendix G Regulatory Information Dual-Band Wireless Access Point Dual-Band Wireless Access Point Wireless-G Adsl Gateway Wireless-G Adsl Gateway Applicable Power Levels in France Location Frequency Range MHz Power EirpOpen the Wireless Network Connection window Wireless-G Adsl Gateway Wireless-G Adsl Gateway Wireless-G Adsl Gateway Wireless-G Adsl Gateway Wireless-G Adsl Gateway Wireless-G Adsl Gateway Appendix H Warranty Information Appendix I Contact Information Europe Mail AddressOutside of Europe Mail Address

WAG54G specifications

Nortel Networks WAG54G is a robust and versatile wireless access gateway that has made significant strides in providing seamless connectivity for both home and small business environments. Designed with the intention of integrating both wired and wireless networking, this device bridges the gap between traditional Ethernet connections and the burgeoning needs of modern wireless communication.

One of the key features of the WAG54G is its ability to deliver high-speed Internet access through multiple protocols, including ADSL and DSL. This flexibility allows users to enjoy fast Internet speeds while simultaneously managing their internal network. The device is equipped with advanced Quality of Service (QoS) features that prioritize traffic, ensuring that critical applications receive the necessary bandwidth for optimal performance.

The WAG54G is powered by advanced 802.11g wireless technology, which offers wireless data rates of up to 54 Mbps. This enables users to stream videos, make VoIP calls, and engage in online gaming without significant lag, enhancing the overall user experience. The device supports a range of wireless security protocols, including WEP, WPA, and WPA2 encryption, ensuring that user data remains secure from potential threats and unauthorized access.

Another noteworthy characteristic of the WAG54G is its straightforward setup process. The unit comes with a user-friendly web interface that simplifies configuration, allowing users to customize their network settings with ease. The WAG54G also features multiple Ethernet ports for wired connections, making it an ideal solution for homes and offices with multiple devices requiring stable Internet connectivity.

In addition to its core functionalities, the WAG54G supports features such as network address translation (NAT) and a built-in firewall that enhances security while allowing multiple devices to share a single Internet connection. The device also incorporates features like DHCP server capabilities and UPnP support, streamlining network management.

Overall, Nortel Networks WAG54G delivers a compelling mix of performance, security, and manageability. Its combination of wired and wireless capabilities, alongside robust security measures, makes it suitable for various networking needs in today’s digital landscape. Users can count on the WAG54G to provide a reliable and efficient solution that supports the demands of modern Internet usage.