Nortel Networks WAG54G manual Wireless-G Adsl Gateway

Page 60

Wireless-G ADSL Gateway

3.Refer to “Problem #10: I am a PPPoE user, and I need to remove the proxy settings or the dial-up pop- up window.”

5.I can’t get my Virtual Private Network (VPN) working through the Gateway.

Access the Gateway’s web interface by going to http://192.168.1.1 or the IP address of the Gateway, and go to the Security tab. Make sure you have IPsec passthrough and/or PPTP pass-through enabled.

VPNs that use IPSec with the ESP (Encapsulation Security Payload known as protocol 50) authentication will work fine. At least one IPSec session will work through the Gateway; however, simultaneous IPSec sessions may be possible, depending on the specifics of your VPNs.

VPNs that use IPSec and AH (Authentication Header known as protocol 51) are incompatible with the Gateway. AH has limitations due to occasional incompatibility with the NAT standard.

Change the IP address for the Gateway to another subnet to avoid a conflict between the VPN IP address and your local IP address. For example, if your VPN server assigns an IP address 192.168.1.X (X is a number from 1 to 254) and your local LAN IP address is 192.168.1.X (X is the same number used in the VPN IP address), the Gateway will have difficulties routing information to the right location. If you change the Gateway’s IP address to 192.168.2.1, that should solve the problem. Change the Gateway’s IP address through the Setup tab of the web interface.

If you assigned a static IP address to any computer or network device on the network, you need to change its IP address accordingly to 192.168.2.Y (Y being any number from 1 to 254). Note that each IP address must be unique within the network.

Your VPN may require port 500/UDP packets to be passed to the computer that is connecting to the IPSec server. Refer to “Problem #7, I need to set up online game hosting or use other Internet applications” for details.

Check the Linksys international website for more information at www.linksys.com/international.

6.I need to set up a server behind my Gateway and make it available to the public.

To use a server like a web, ftp, or mail server, you need to know the respective port numbers they are using. For example, port 80 (HTTP) is used for web; port 21 (FTP) is used for FTP, and port 25 (SMTP outgoing) and port 110 (POP3 incoming) are used for the mail server. You can get more information by viewing the documentation provided with the server you installed.

Follow these steps to set up port forwarding through the Gateway’s web-based utility. We will be setting up web, ftp, and mail servers.

1.Access the Gateway’s web-based utility by going to http://192.168.1.1 or the IP address of the Gateway. Go to the Applications and Gaming => Port Range Forwarding tab.

2.Enter any name you want to use for the Customized Application.

3.Enter the External Port range of the service you are using. For example, if you have a web server, you would enter the range 80 to 80.

4.Check the protocol you will be using, TCP and/or UDP.

5.Enter the IP address of the computer or network device that you want the port server to go to. For example, if the web server’s Ethernet adapter IP address is 192.168.1.100, you would enter 100 in the

Appendix A: Troubleshooting

53

Common Problems and Solutions

Image 60
Contents 802 GHz .11g Wireless- G How to Use this Guide Copyright and TrademarksWord definition Table of Contents Wireless-G Adsl Gateway Ports and Reset Button on Side Panel Network24 Advanced Wireless Settings Figure C-2 MAC Address/Adapter Address Introduction WelcomeWhat’s in this User Guide? Wireless-G Adsl Gateway Planning Your Network Gateway’s FunctionsIP Addresses What’s an IP Address?What is a VPN? Dhcp Dynamic Host Configuration Protocol ServersDynamic IP Addresses Why do I need a VPN? VPN Gateway to VPN GatewayWireless-G Adsl Gateway Getting to Know the Wireless-G Adsl Gateway Ports and Reset Button on Side PanelLEDs and Power Button on Side Panel PowerBottom Panel Bottom Panel with Stand Closed PositionConnecting the Wireless-G Adsl Gateway OverviewWired Connection to a Computer Connect the Adsl LineWireless Connection to a Computer Configuring the Wireless-G Adsl Gateway SetupWireless SecurityAccess Restriction AdministrationApplications & Gaming StatusHow to Access the Web-based Utility Setup TabBasic Setup Tab Internet SetupRFC 1483 Bridged Dynamic IP Static IPRFC 1483 Routed RFC 1483 RoutedIPoA RFC 2516 PPPoEBridged Mode Only RFC 2364 PPPoAOptional Settings required by some ISPs Network SetupConfiguring the Wireless-G Adsl Gateway Setup Tab Ddns Tab DynDNS.orgTZO.com Advanced Routing Tab Advanced Routing15 Routing Table Wireless Tab Basic Wireless Settings TabWireless Security Tab Wireless NetworkWPA Pre-Shared Key WPA RadiusWireless Access Tab Wireless Network AccessWireless Client MAC List screen Advanced Wireless Settings Tab Advanced WirelessSecurity Tab Firewall TabFirewall Additional FiltersVPN Tab VPN PassthroughIPSec VPN Tunnel 28 VPN Settings Summary 29 Advanced IPSec Settings Access Restriction Tab Internet Access Tab33 List of PCs Applications & Gaming Tab Single Port Forwarding TabSingle Port Forwarding Port Range Forwarding Tab Port Triggering TabDMZ Tab QoS TabQoS PVC QoS PriorityEdit list of QoS Settings 40 Edit List of QoS SettingsAdministration Tab Gateway AccessManagement Tab Snmp UPnPIGMP-Proxy IGMP-SnoopingTelnet Reporting Tab ReportingEmail Alerts Diagnostics Tab Backup&Restore TabBackup Configuration Restore ConfigurationFactory Defaults Tab Firmware Upgrade TabReboot Tab Upgrade from LANStatus Tab Gateway TabGateway Information Internet ConnectionLocal Network Tab 51 Local Network54 Wireless DSL Connection Tab DSL StatusPVC Connection Appendix a Troubleshooting Common Problems and SolutionsNeed to set a static IP address on a computer Want to test my Internet connection Wireless-G Adsl Gateway Wireless-G Adsl Gateway TCP UDP Can’t get the Internet game, server, or application to work To start over, I need to set the Gateway to factory default Need to upgrade the firmwareFirmware upgrade failed, and/or the Power LED is flashing My DSL service’s PPPoE is always disconnectingPower LED flashes continuously Frequently Asked Questions Where is the Gateway installed on the network?Is IPSec Passthrough supported by the Gateway? Does the Gateway support IPX or AppleTalk?What is Network Address Translation and what is it used for? Does the Gateway support ICQ send file?What is DMZ Hosting? What are the advanced features of the Gateway? What is the Ieee 802.11g standard?Is the Gateway cross-platform compatible? How many ports can be simultaneously forwarded?What Ieee 802.11b and 802.11g features are supported? What is ad-hoc mode?What is infrastructure mode? What is roaming?What is the ISM band? What is Spread Spectrum?What is DSSS? What is FHSS? And what are their differences? What is WEP?How do I reset the Gateway? How do I resolve issues with signal loss?Have excellent signal strength, but I cannot see my network Appendix B Wireless Security Security PrecautionsSecurity Threats Facing Wireless Networks Appendix B Wireless Security Wireless-G Adsl Gateway Figure C-1 IP Configuration Screen Windows 98 or Me InstructionsWindows 2000 or XP Instructions Figure C-3 MAC Address/Physical AddressFigure D-1 Firmware Upgrade Appendix D Upgrading FirmwareAppendix E Glossary Wireless-G Adsl Gateway Wireless-G Adsl Gateway Wireless-G Adsl Gateway Wireless-G Adsl Gateway Appendix F Specifications Storage Humidity Appendix G Regulatory Information Dual-Band Wireless Access Point Dual-Band Wireless Access Point Wireless-G Adsl Gateway Wireless-G Adsl Gateway Applicable Power Levels in France Location Frequency Range MHz Power EirpOpen the Wireless Network Connection window Wireless-G Adsl Gateway Wireless-G Adsl Gateway Wireless-G Adsl Gateway Wireless-G Adsl Gateway Wireless-G Adsl Gateway Wireless-G Adsl Gateway Appendix H Warranty Information Appendix I Contact Information Europe Mail AddressOutside of Europe Mail Address

WAG54G specifications

Nortel Networks WAG54G is a robust and versatile wireless access gateway that has made significant strides in providing seamless connectivity for both home and small business environments. Designed with the intention of integrating both wired and wireless networking, this device bridges the gap between traditional Ethernet connections and the burgeoning needs of modern wireless communication.

One of the key features of the WAG54G is its ability to deliver high-speed Internet access through multiple protocols, including ADSL and DSL. This flexibility allows users to enjoy fast Internet speeds while simultaneously managing their internal network. The device is equipped with advanced Quality of Service (QoS) features that prioritize traffic, ensuring that critical applications receive the necessary bandwidth for optimal performance.

The WAG54G is powered by advanced 802.11g wireless technology, which offers wireless data rates of up to 54 Mbps. This enables users to stream videos, make VoIP calls, and engage in online gaming without significant lag, enhancing the overall user experience. The device supports a range of wireless security protocols, including WEP, WPA, and WPA2 encryption, ensuring that user data remains secure from potential threats and unauthorized access.

Another noteworthy characteristic of the WAG54G is its straightforward setup process. The unit comes with a user-friendly web interface that simplifies configuration, allowing users to customize their network settings with ease. The WAG54G also features multiple Ethernet ports for wired connections, making it an ideal solution for homes and offices with multiple devices requiring stable Internet connectivity.

In addition to its core functionalities, the WAG54G supports features such as network address translation (NAT) and a built-in firewall that enhances security while allowing multiple devices to share a single Internet connection. The device also incorporates features like DHCP server capabilities and UPnP support, streamlining network management.

Overall, Nortel Networks WAG54G delivers a compelling mix of performance, security, and manageability. Its combination of wired and wireless capabilities, alongside robust security measures, makes it suitable for various networking needs in today’s digital landscape. Users can count on the WAG54G to provide a reliable and efficient solution that supports the demands of modern Internet usage.