Nortel Networks WAG54G manual To start over, I need to set the Gateway to factory default

Page 63

Wireless-G ADSL Gateway

For Netscape 4.7 or higher:

1.Start Netscape Navigator, and click Edit, Preferences, Advanced, and Proxies.

2.Make sure you have Direct connection to the Internet selected on this screen.

3.Close all the windows to finish.

11.To start over, I need to set the Gateway to factory default.

Hold the Reset button for 10 seconds and then release it. This will return the Internet settings, password, forwarding, and other settings on the Gateway to the factory default settings. In other words, the Gateway will revert to its original factory configuration.

12.I need to upgrade the firmware.

In order to upgrade the firmware with the latest features, you need to go to the Linksys international website and download the latest firmware at www.linksys.com/international.

Follow these steps:

1.Go to the Linksys international website at http://www.linksys.com/international and select your region or country.

2.Click the Products tab and select the Gateway.

3.On the Gateway’s webpage, click Firmware, and then download the latest firmware for the Gateway.

4.To upgrade the firmware, follow the steps in the Administration section found in “Chapter 5: Configuring the Wireless-G ADSL Gateway.”

13.The firmware upgrade failed, and/or the Power LED is flashing.

The upgrade could have failed for a number of reasons. Follow these steps to upgrade the firmware and/or make the Power LED stop flashing:

If the firmware upgrade failed, use the TFTP program (it was downloaded along with the firmware). Open the pdf that was downloaded along with the firmware and TFTP program, and follow the pdf’s instructions.

Set a static IP address on the computer; refer to “Problem #1, I need to set a static IP address.” Use the following IP address settings for the computer you are using:

IP Address: 192.168.1.50

Subnet Mask: 255.255.255.0

Gateway: 192.168.1.1

Perform the upgrade using the TFTP program or the Gateway’s web-based utility through its Administration tab.

14.My DSL service’s PPPoE is always disconnecting.

PPPoE is not actually a dedicated or always-on connection. The DSL ISP can disconnect the service after a period of inactivity, just like a normal phone dial-up connection to the Internet.

There is a setup option to “keep alive” the connection. This may not always work, so you may need to re- establish connection periodically.

Appendix A: Troubleshooting

56

Common Problems and Solutions

Image 63
Contents 802 GHz .11g Wireless- G How to Use this Guide Copyright and TrademarksWord definition Table of Contents Wireless-G Adsl Gateway Network Ports and Reset Button on Side Panel24 Advanced Wireless Settings Figure C-2 MAC Address/Adapter Address Welcome IntroductionWhat’s in this User Guide? Wireless-G Adsl Gateway What’s an IP Address? Planning Your NetworkGateway’s Functions IP AddressesWhat is a VPN? Dhcp Dynamic Host Configuration Protocol ServersDynamic IP Addresses VPN Gateway to VPN Gateway Why do I need a VPN?Wireless-G Adsl Gateway Ports and Reset Button on Side Panel Getting to Know the Wireless-G Adsl GatewayPower LEDs and Power Button on Side PanelBottom Panel with Stand Closed Position Bottom PanelOverview Connecting the Wireless-G Adsl GatewayConnect the Adsl Line Wired Connection to a ComputerWireless Connection to a Computer Security Configuring the Wireless-G Adsl GatewaySetup WirelessStatus Access RestrictionAdministration Applications & GamingInternet Setup How to Access the Web-based UtilitySetup Tab Basic Setup TabStatic IP RFC 1483 Bridged Dynamic IPRFC 1483 Routed RFC 1483 RoutedRFC 2516 PPPoE IPoARFC 2364 PPPoA Bridged Mode OnlyNetwork Setup Optional Settings required by some ISPsConfiguring the Wireless-G Adsl Gateway Setup Tab Ddns Tab DynDNS.orgTZO.com Advanced Routing Advanced Routing Tab15 Routing Table Wireless Network Wireless TabBasic Wireless Settings Tab Wireless Security TabWPA Radius WPA Pre-Shared KeyWireless Access Tab Wireless Network AccessWireless Client MAC List screen Advanced Wireless Advanced Wireless Settings TabAdditional Filters Security TabFirewall Tab FirewallVPN Tab VPN PassthroughIPSec VPN Tunnel 28 VPN Settings Summary 29 Advanced IPSec Settings Internet Access Tab Access Restriction Tab33 List of PCs Applications & Gaming Tab Single Port Forwarding TabSingle Port Forwarding Port Triggering Tab Port Range Forwarding TabPVC QoS Priority DMZ TabQoS Tab QoS40 Edit List of QoS Settings Edit list of QoS SettingsAdministration Tab Gateway AccessManagement Tab UPnP SnmpIGMP-Proxy IGMP-SnoopingTelnet Reporting Tab ReportingEmail Alerts Restore Configuration Diagnostics TabBackup&Restore Tab Backup ConfigurationUpgrade from LAN Factory Defaults TabFirmware Upgrade Tab Reboot TabInternet Connection Status TabGateway Tab Gateway Information51 Local Network Local Network Tab54 Wireless DSL Connection Tab DSL StatusPVC Connection Appendix a Troubleshooting Common Problems and SolutionsNeed to set a static IP address on a computer Want to test my Internet connection Wireless-G Adsl Gateway Wireless-G Adsl Gateway TCP UDP Can’t get the Internet game, server, or application to work My DSL service’s PPPoE is always disconnecting To start over, I need to set the Gateway to factory defaultNeed to upgrade the firmware Firmware upgrade failed, and/or the Power LED is flashingPower LED flashes continuously Does the Gateway support IPX or AppleTalk? Frequently Asked QuestionsWhere is the Gateway installed on the network? Is IPSec Passthrough supported by the Gateway?Does the Gateway support ICQ send file? What is Network Address Translation and what is it used for?What is DMZ Hosting? How many ports can be simultaneously forwarded? What are the advanced features of the Gateway?What is the Ieee 802.11g standard? Is the Gateway cross-platform compatible?What is roaming? What Ieee 802.11b and 802.11g features are supported?What is ad-hoc mode? What is infrastructure mode?What is WEP? What is the ISM band?What is Spread Spectrum? What is DSSS? What is FHSS? And what are their differences?How do I reset the Gateway? How do I resolve issues with signal loss?Have excellent signal strength, but I cannot see my network Appendix B Wireless Security Security PrecautionsSecurity Threats Facing Wireless Networks Appendix B Wireless Security Wireless-G Adsl Gateway Windows 98 or Me Instructions Figure C-1 IP Configuration ScreenFigure C-3 MAC Address/Physical Address Windows 2000 or XP InstructionsAppendix D Upgrading Firmware Figure D-1 Firmware UpgradeAppendix E Glossary Wireless-G Adsl Gateway Wireless-G Adsl Gateway Wireless-G Adsl Gateway Wireless-G Adsl Gateway Appendix F Specifications Storage Humidity Appendix G Regulatory Information Dual-Band Wireless Access Point Dual-Band Wireless Access Point Wireless-G Adsl Gateway Wireless-G Adsl Gateway Location Frequency Range MHz Power Eirp Applicable Power Levels in FranceOpen the Wireless Network Connection window Wireless-G Adsl Gateway Wireless-G Adsl Gateway Wireless-G Adsl Gateway Wireless-G Adsl Gateway Wireless-G Adsl Gateway Wireless-G Adsl Gateway Appendix H Warranty Information Europe Mail Address Appendix I Contact InformationOutside of Europe Mail Address

WAG54G specifications

Nortel Networks WAG54G is a robust and versatile wireless access gateway that has made significant strides in providing seamless connectivity for both home and small business environments. Designed with the intention of integrating both wired and wireless networking, this device bridges the gap between traditional Ethernet connections and the burgeoning needs of modern wireless communication.

One of the key features of the WAG54G is its ability to deliver high-speed Internet access through multiple protocols, including ADSL and DSL. This flexibility allows users to enjoy fast Internet speeds while simultaneously managing their internal network. The device is equipped with advanced Quality of Service (QoS) features that prioritize traffic, ensuring that critical applications receive the necessary bandwidth for optimal performance.

The WAG54G is powered by advanced 802.11g wireless technology, which offers wireless data rates of up to 54 Mbps. This enables users to stream videos, make VoIP calls, and engage in online gaming without significant lag, enhancing the overall user experience. The device supports a range of wireless security protocols, including WEP, WPA, and WPA2 encryption, ensuring that user data remains secure from potential threats and unauthorized access.

Another noteworthy characteristic of the WAG54G is its straightforward setup process. The unit comes with a user-friendly web interface that simplifies configuration, allowing users to customize their network settings with ease. The WAG54G also features multiple Ethernet ports for wired connections, making it an ideal solution for homes and offices with multiple devices requiring stable Internet connectivity.

In addition to its core functionalities, the WAG54G supports features such as network address translation (NAT) and a built-in firewall that enhances security while allowing multiple devices to share a single Internet connection. The device also incorporates features like DHCP server capabilities and UPnP support, streamlining network management.

Overall, Nortel Networks WAG54G delivers a compelling mix of performance, security, and manageability. Its combination of wired and wireless capabilities, alongside robust security measures, makes it suitable for various networking needs in today’s digital landscape. Users can count on the WAG54G to provide a reliable and efficient solution that supports the demands of modern Internet usage.